Search:

Nope

So I finaly got around to pushing the vintage SBS chamber out to 3" so I can run my full length brass loads in it. I spent a bit of time dialing in various payloads to see what it shot best with.
...

https://www.nzhuntingandshooting.co.nz/f13/410-sbs-hammer-folding-poachers-shotgun-98832/

Eternal Poseidon SBS folding poachers .410 RRP:$999

Camerins imported a heap so your local could order one in from them

Drill the primer pockets out in the lathe to fit a 209 primer

Nah strictly lead for me.
Had the barrels running hot opening weekend, the 3/4 and 1oz loads have been killing well.

I also picked up a new .410 for evening strolls with the boy. It's a Turkish...

I would argue yes there is.. the biggest advantage is the nasty 4 letter word... Lead

Youd be supprised what great patterns you can get from a 3/4oz or 1oz long column of #5 shot through a full...

Yes the powder charge weight is the same in most .410 loads, my brass works the same but needs about 3gr more than the book says for plastic hulls due to brass volume and large pistol primers instead...

got a link?

No I'm not, the clear vinyl I'm using as the over shot card is about 2mm thick and slightly rubbery so is very tight to get in place and once seated is much more robust than glued in cardboard.
A...

I've recently restored a 100+ year old .410 folding poachers gun. It is the lightweight model with the skeleton buttstock and half octagonal barrel. Ive been on the hunt for the side by side model of...

I shoot full choke in both barrels and run the Yanky custom tungsten stretch wads that hold a full 3/4oz within the wad, the trade off is the lack of wad cushioning so the lead pellets probably...

All steel. This one may be for sale in a couple of weeks if I manage to land the vintage s/s I'm chasing

It's a Yildiz Silah Sanayi, one if the higher grade modern Turks, light framed but full size gun with nice dark high grade Turkish walnut and laser engraved nickel finish

I had a flatmate that was a bit of a weasel once.. but pet stoat? Nope

Ive been testing some 1 oz loads in the .410 3" brass, so happened to have the little shotty handy when this little guy appeared this morning. I have chickens and ducks sitting on eggs so it was...

All my 410s have patterned best with #4s and #5s. The 11/16oz load in the 3" long plastic wads pattern the best followed by the 3/4oz load with the felt wads.

Yes the brass cases definitely needs a nitro card rammed over the powder to keep consistent ignition. Even when I use a plastic wad I still use a thick nitro card as well.
Did you get a chance to...

Sharing the .410 love with another 300+ brass cases made this weekend

169083

169084

169085

169086

These guys normally get a free pass around my house but this one was pushing its luck at the base of my trees..
#4 roll ya owns put him down instantly

154694

154695

Nah I was just winding Tommy up, this was actually a mate of mine with his Edgun .25cal PCP.

I jumped 3 of them from the maize feed lot and the others never came back.

152727

PS: I dont own...

he no longer has a problem...

152725

Spent some time developing loads today as some more components turned up from USA.
I fine tuned the load of H110 for a 1100fps with 3/4oz of #5 shot.

146492

146493


Also worked up a...

Thank you my pagan friend..
No plans to market anything? I listed all parts used and where to get them if anyone else wants to use brass in their .410g bores. The brass can be fire formed from...