Thread: Quality "everlasting" .410 shells

Spent some time developing loads today as some more components turned up from USA.
I fine tuned the load of H110 for a 1100fps with 3/4oz of #5 shot.






Also worked up a 11/16oz load with my new max wads.
Amazed how 0.1gr of H110 can make such a big difference in velocity in this little shot shell.
I started low as there is no data out there for these wads in brass cases. 1.5gr above book max for Super X hulls got me on the right track much like I did for the 3/4oz load then I slowly walked it up to 1200fps by incroments of 0.1gr at a time (1200fps is the same as Super X factory 11/16oz 3" loads in my gun)











Very punchy little load! I will pattern them both once I find a bit of cardboard big enough.

Loaded up 12 to fill my belt pouch for evening walks.
The neighbor has a heap of pigeons on his stock feed pad at the moment too so I will go test them out in the next few days.