Good fault finding. Looks like there is your issue!
On another note, I’m not sure that the viscount/Hunter actions were considered ‘soft’. As far as I’m aware they can be loaded to full .270...
Type: Posts; User: Hunter_Nick
Good fault finding. Looks like there is your issue!
On another note, I’m not sure that the viscount/Hunter actions were considered ‘soft’. As far as I’m aware they can be loaded to full .270...
Yeah Moa Hunter a new mainspring will probably sort it. I’m about to source a new one for my Hunter 6x45. It already has a couple of spacers to try and get the spring tension up. Talked to Allan Carr...
Micky Duck my understanding of how these half cocks work is as follows:
As the bolt handle is brought down, the nose of the cocking piece moved out of the ‘cocked’ detent, and starts to move forward...
167496
There you go Moa Hunter hope that helps
Yes, the rear of the mag well gets lengthened and the bolt stop needs to be shortened to increase the bolt stroke. The hardest part is folding up a new mag box, takes quite a bit of trial and error...
Mathias isn’t that the truth! I’ve just finally got my little 6x45 feeding properly from the first round to the last. Some much buggerising around to get it to work with that BSA extractor and a...
I’ve got two BSA hunters here, I’ll get you a photo of each bolt to compare. Have to wait till tomorrow morning though.