Sonicjoe
Member

107 Likes

Page 1 of 8 12345678 Last

• Jump to page:

1. 
   Sonicjoe liked post by BRADS On thread : How far away was the last deer you shot???

   Yeah he's been poking a mod for many months, finally got what's coming. Hopefully he comes back a changed man and doesn't feel the need to dribble on every thread. Sent from my SM-S916B using...

   Liked On: 22-12-2023, 08:58 PM

2. 
   Sonicjoe liked post by DGNZ On thread : Show me your knives

   Used to make a few knives, not had the spare time as of late unfortunately but thought you lot might appreciate some pics. 234488 234489 234490 234491

   Liked On: 02-10-2023, 10:18 AM

3. 
   Sonicjoe liked post by Ryan_Songhurst On thread : Gear shopping - Local vs Offshore - I know...

   Yes

   Liked On: 17-07-2023, 08:33 PM

4. 
   Sonicjoe liked post by BRADS On thread : Hunting rifles and ammo to hire?

   As is what some people post on this forum yet it doesn't stop them Sent from my SM-S916B using Tapatalk

   Liked On: 09-07-2023, 04:53 PM

5. 
   Sonicjoe liked post by Larskramer On thread : Sika stag down

   Popped up and into the kawekas over the weekend, On the first arvo my mate shot his first sika at 300, just a tasty little male yearling. The next morning, we headed to another spot and as I...

   Liked On: 06-06-2023, 09:13 PM

6. 
   Sonicjoe liked post by Bushline On thread : Fires

   Must have been a (heat sika)

   Liked On: 21-05-2023, 11:20 PM

7. 
   Sonicjoe liked post by kiwijames On thread : Catch Any Trout Today?

   That's a fantastic looking fish. If you were planning to release fish in future there's a couple pointers that will give your fish a far greater chance of survival. Please don't take this as a...

   Liked On: 21-05-2023, 11:09 AM

8. 
   Sonicjoe liked post by Lucky On thread : Gun Porn, show off your new toys

   Fairly new this one , Alpine Prec. build . 260 Rem Defiance Anti Brux barrel 20” Manners stock Hawkins rings , bottom metal Trigger tech DPT 223154

   Liked On: 06-05-2023, 10:11 PM

9. 
   Sonicjoe liked post by Cyclops On thread : Stewart Island police

   Chamber flags are not for the firearms illiterate. They are not virtue signalling. Just because you may not like them doesn't make their use wrong. NRANZ ranges and TSNZ ranges require chamber...

   Liked On: 27-04-2023, 04:47 PM

10. 
    Sonicjoe liked post by stagstalker On thread : Racing my new GasGas

    That’s great, good for you. No claims to be fastest guy out there from me, I'm just out there to have fun.

    Liked On: 09-04-2023, 09:57 AM

11. 
    Sonicjoe liked post by grandpamac On thread : Shoulder Bump Advice

    Greetings, The tight spot on the shoulder in the chamber may not be where your comparator is measuring so go with the measurement where the case chambers freely. There is one thing to watch on...

    Liked On: 08-04-2023, 06:20 PM

12. 
    Sonicjoe liked post by Fisherman On thread : Shoulder Bump Advice

    I don't know what the issue is bud but I do know the rem mag with that belt can be problematic. Mine has a really loose chamber and my Redding body die would really struggle with resizing the brass...

    Liked On: 07-04-2023, 09:38 PM

13. 
    Sonicjoe liked post by Dicko On thread : Shoulder Bump Advice

    If you brass is growing After resizing it’s likely that you are not lubing the inside of the case neck. This cases your brass to lengthen on the up stroke of the ram. Sent from my iPhone using...

    Liked On: 07-04-2023, 09:38 PM

14. 
    Sonicjoe liked post by PipIstrelle On thread : Shoulder Bump Advice

    Remove the expander then size a fired case and measure to the shoulder , if the case has grown its the die that's the problem . The problem is caused by the case body being sized and the shoulder not...

    Liked On: 07-04-2023, 09:38 PM

15. 
    Sonicjoe liked post by shift14 On thread : Hardy hybrid 6.5 prc to 308 short barrel

    Good luck with that …… B

    Liked On: 29-01-2023, 05:57 PM

Page 1 of 8 12345678 Last

• Jump to page: