20 or 22” I’m not sure I shot the 80s at 3080fps 22” and didn’t bother with the 88gn as mine was 8 twist that data’s from Greg
20 or 22” I’m not sure I shot the 80s at 3080fps 22” and didn’t bother with the 88gn as mine was 8 twist that data’s from Greg
Download GRT mate. You can model the 22-20 and add wildcats quite easily. It's exceptionally handy as a sense check of what velocity to expect pressure as well as to give ideas for powders for strange combinations.
If you can’t find data, try using 6x47 Remington data and drop back 1/2 grain, essentially.222 mag necked up to 6mm,
Be more data for 70-75gr weights,
I have one on a cooper, Hornardy had data.
Do you already have one or are you building it?
If building, look at the 22x47lap or 22cm both are big step up in performance over the 22T and can download them if you dont need the speed to 204 speeds
Konus binoculars " The power to imagine"
There's a big thread on Snipershide about 223AI, with a lot of info for 85-90gr projectiles. Not the same cartridge, buy case capacity will be quite close.
Barrel length will be what makes the difference, a 26" barrel will likely be good for 2850fps, whereas and 18" is going to be considerably slower.
Bookmarks