Thread: 22-250 loading advice

Originally Posted by Marty Henry

1:14 pretty much the ideal twist for 55 grains what are the dissapointing results, speed or accuracy. Its a catridge thats known go be easy to get good accuracy from with just about any load.

Na I’m not interested in speed I just want something that’ll group an inch or better to use on varmint. I’ve tried 3 different types of factory ammo and it sprays them all over the paper as well


Sent from my iPhone using Tapatalk

Originally Posted by Gusto

Na I’m not interested in speed I just want something that’ll group an inch or better to use on varmint. I’ve tried 3 different types of factory ammo and it sprays them all over the paper as well


Sent from my iPhone using Tapatalk

Sounds like something is a bit off with your rig. I would've thought at least one of the factory loads would have shot MoA.
Is the muzzle crown undamaged, scope mounts tight, barrel free of copper fouling?

Originally Posted by rockland

Sounds like something is a bit off with your rig. I would've thought at least one of the factory loads would have shot MoA.
Is the muzzle crown undamaged, scope mounts tight, barrel free of copper fouling?

I took it to my local gunsmith we put a bore scope down it and he re crowned it cause there was some pitting around it. Scope is brand new leupold torqued down. Given it a good clean but your right I thought it was the gun as well


Sent from my iPhone using Tapatalk