What powder are you using with the VLD's @HOWA308 ? Have a box of them sitting here I was going to try after the Scenar's failed me, but they never did!
Also got 120 Amax tearing ragged holes.
What powder are you using with the VLD's @HOWA308 ? Have a box of them sitting here I was going to try after the Scenar's failed me, but they never did!
Also got 120 Amax tearing ragged holes.
Ryan I started out with 2209 and got mid 2700 before pressure.... having some Superformance from my 300wsm I decided to try that knowing it was a slower burner but progressive. Have plenty of room as projectile is seated out at 2.950 COL, giving me about 20thou jump as these projectiles seem to like a close jump. Plus the BC is hard to go past!
Got some load data from the U.S. sites and got close to 2900 but backed of .5gn to allow for hotter weather. Have settled with a respectable 2830 F/S and 140 VLDs.
Ha ha, sorry didn't mean to exclude our Euro 6.5 Brothers. Post them if you got some.....
Contact me for reloading components, brass, projectiles, powder, primers, etc
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
Contact me for reloading components, brass, projectiles, powder, primers, etc
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
Bookmarks