Thread: 300 Rum Brass Cases

I'll contribute nicely to this thread now I just got back from a wee play. . .

I got given a 338 edge to have a fiddle with after it wasn't performing so well. . . . . It had nice components and was put together well who ever done it, all I done was true it up (action, grind the recoil lug etc), re space it to suit and give it the once over, bedding was good had 2thou in it rings where straight etc after loading up his 'pet load' he was given up the range sight in 2 shots and fuck this. . . . . . . .

Told him I would give it my special treatment. . . . . .here is same components and 4gr MORE powder them before for a extra 120ft


Don't worrie about creators to much as rem actions firing pin holes are always bit big.

Is this the rem brass is comment?

Top photo is 12thou head expansion. . . .
Bottom is 1 1.5 over 30 rounds.

For sake of it pet load was 96gr, 2225, 215 primer, otm seated at 3.97"

New load is same but 100gr an 4.05"

Looking forward to comments and thoughts?


Sent from my GT-I9300T using Tapatalk 2