Thread: .308 - 150 grain speed please.

Any result on this?

Originally Posted by veitnamcam

Any result on this?

Nothing on speeds. Need to chrony. Accuracy is NOW good with 150 Accubonds.

The Kimber 280ai shoots the 140 to the same height as the 162 Amax and 168 LRAB. Different weighted powders obviously. Groups v well. 0.3" groups using 140 Partitions. @ 1" - 162 Amax. Did tonight.

Where is that ni chrony ? I'd better look see.

I get an average of just slightly over 2,800 fps in a 20" .308 using 2206H and 150gr SST's. It's a very warm load but certainly not max. Case life is very good with Lapua brass.

Originally Posted by 10-Ring

I get an average of just slightly over 2,800 fps in a 20" .308 using 2206H and 150gr SST's. It's a very warm load but certainly not max. Case life is very good with Lapua brass.

Thanks mate.

Originally Posted by veitnamcam

Any result on this?

150Accubonds.
47.4@2208= 2780-2820fps.
Acccuracy settled down during the shoot. No pressure signs.

130ttsx
50.4@2208=2850-2900fps. Too slow for me.