Get a Lee push through size die and size them down I have sized .459" cast bullets to .452" as long as the cartridge will chamber you are OK
with low velocity loads, lube the bullets before sizing them
Get a Lee push through size die and size them down I have sized .459" cast bullets to .452" as long as the cartridge will chamber you are OK
with low velocity loads, lube the bullets before sizing them
I wouldn't use Trail Boss if you are going to shoot subs. In a previous thread in answer to my question another member explained that TB was not made for subsonic loads. The Velocity spread is too great with TB
Overkill is underated !!!
http://terminatorproducts.co.nz/
http://www.youtube.com/user/Terminat...?feature=guide
No, Google 450 Bushmaster a see what pops up, Or how about this
http://noebulletmolds.com/NV/images/...AD5_Sketch.Jpg
I size lead 500 grains to .452 for both my 45/70s, being lead, the boot up the bum on take off will bump them up to fit the barrel dia, you can get some stripping by the rifling on the trip down the barrel, a harder lead compound will help stop this. Have a shitload of shot I’m melting down for projectiles, so should go well
Boom, cough,cough,cough
Bookmarks