Thread: 6.5-284

Originally Posted by R93

I would start with a new batch of brass Red and then see how ya go. Compare it to the stuff you have used as well. If the shoulder is bearing on the chamber it can be causing eratic groups. If you want too persist I would trim them to length then bump the shoulder till they chamber easily and then bump them another thou after that.
Personally I would try new brass and go from there.

If I chances a rifle that is just going to be 'reloaded for like all them are then I also head space it on the brass that they are going to use an make it firm, seams to work for me so far?

I would say the brass has had fair bit of a life see, the lapua brass I have used is hard as hell an shows no signs till way up there. Lapua 6.5 284 is hard to get to at moment

sent from my Samsung s3 using tapatalk 2