Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator DPT


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 21
Like Tree16Likes

Thread: 6.5X55 ADI 2208 load help! Please

  1. #1
    Member
    Join Date
    Apr 2014
    Location
    Invercargill
    Posts
    1,768

    6.5X55 ADI 2208 load help! Please

    I am helping a friend to reload for his 6.5, he has done it in the past(long time ago) and lost his load data for it. Pulling out one of his old reloaded cartridges I find out it was done with 2209 and now he only have available 2208.
    Projectile is Hornady 140gn Interlock.
    Helping question, can someone give me some advise in a start load so I don't need to "re-do" a full load development again? I have the ADI book but a "solid" starting load will be appreciated.

    Thank you in advance for any help.

    Mac

  2. #2
    Member Hayden C's Avatar
    Join Date
    Aug 2013
    Location
    CHCH
    Posts
    606
    You probably have this data.

    http://www.adi-powders.com.au/handlo...Swedish+Mauser

    Rather than rely on suggestions from the internet just use the manufacturers recommendations and re do the load development.

    Its probably going to be easier to simply buy some 2209 and replicate the original load.
    mucko and PERRISCICABA like this.

  3. #3
    Member
    Join Date
    Apr 2012
    Location
    canterbury
    Posts
    1,621
    O9 will be better
    Blaser, zimmer and PERRISCICABA like this.

  4. #4
    By Popular Demand gimp's Avatar
    Join Date
    Dec 2011
    Location
    The Big H
    Posts
    8,886
    Quote Originally Posted by longrange308 View Post
    O9 will be better
    Yup, make him get the right powder for the job man
    Beaker and PERRISCICABA like this.

  5. #5
    Member
    Join Date
    Apr 2014
    Location
    Invercargill
    Posts
    1,768
    Cheers guys, I probably made my mind, I will make he buy the 09.

    Cheers.

    Mac
    Beaker likes this.

  6. #6
    Ejected
    Join Date
    Dec 2011
    Posts
    2,572
    Yet we always got best results with W760 for the 6.5.

  7. #7
    Member
    Join Date
    Dec 2011
    Location
    NI
    Posts
    11,852
    Quote Originally Posted by Wirehunt View Post
    Yet we always got best results with W760 for the 6.5.
    Same burn rate as 2209. But w760 is sooo last year.

  8. #8
    Member zimmer's Avatar
    Join Date
    Oct 2012
    Location
    Waikato
    Posts
    4,986
    Quote Originally Posted by Tahr View Post
    Same burn rate as 2209. But w760 is sooo last year.
    That being the case I am in the shit then. I am sitting on 11 canisters of 760 just for my 6.5x55.
    Wirehunt and PERRISCICABA like this.

  9. #9
    Member sako75's Avatar
    Join Date
    Dec 2011
    Location
    Supercity
    Posts
    4,945
    They sell zimmer frames to support the 760 so don't stress too much
    zimmer likes this.

  10. #10
    Member
    Join Date
    Aug 2012
    Location
    helensville nz
    Posts
    4,366
    2209 and 2213sc are better than 2208 for 6.5 i have used 2213sc in all mine but 2209 works well aswell
    PERRISCICABA likes this.

  11. #11
    Ejected
    Join Date
    Dec 2011
    Posts
    2,572
    Quote Originally Posted by Tahr View Post
    Same burn rate as 2209. But w760 is sooo last year.
    Yet the 120s were marching along at 3000 and it goes through the powder thrower so much easier than 2208.

  12. #12
    Member
    Join Date
    Dec 2011
    Location
    Quakechurch
    Posts
    1,737
    Nothing wrong with 2208 for lighter pills... doing a workup on Barnes TTSX100s at the moment in the 6.5x55 my max in 18" barrel is 46 grains for around 3150... will be running 45 grains for around 3080 I expect after sorting accuracy..

    2209 would be better for 120gr plus I would expect..

  13. #13
    Member
    Join Date
    Nov 2014
    Location
    Christchuch New Zealand
    Posts
    5,846
    My 6.5 really liked a load of 42.4gr 2209, with a 140gr pill. I did not have access to a chrony so unsure of speed, but the load development was aimed at best group size at 100m rather than speed. I was using a husqvarna M96 swede so hopefully that can get you started.
    PERRISCICABA likes this.

  14. #14
    Member
    Join Date
    Dec 2013
    Location
    Tokoroa
    Posts
    1,221
    My Sako 75 6.5x55 likes 139 Scenars and 46.6 grains of 2213sc velocity is 2597fps also barnes 120TSX and 45.5 grains 2209 velocity 2987fps both loads are not hot in my rifle but work up if you try them,
    tried 2217 but it is too slow lots of unburnt powder left in barrel, have shot the 139 Scenars to over 2600fps got some pressure signs and backed off, if you want a good bush load get some Norma 156 RN Lapua MEGA 156 or Hornady 160 RN they have a .377 BC and will penetrate a Deer end to end at 2400fps I have shot 1 hole groups with the Norma,
    the 6.5x55 is one of the easiest calibre's to get accurate loads for just stick with medium slow powder and medium to heavy bullets.
    PERRISCICABA likes this.

  15. #15
    sneakywaza I got
    Join Date
    May 2013
    Location
    Fairlie
    Posts
    3,538
    Quote Originally Posted by shooternz View Post
    My Sako 75 6.5x55 likes 139 Scenars and 46.6 grains of 2213sc velocity is 2597fps also barnes 120TSX and 45.5 grains 2209 velocity 2987fps both loads are not hot in my rifle but work up if you try them,
    tried 2217 but it is too slow lots of unburnt powder left in barrel, have shot the 139 Scenars to over 2600fps got some pressure signs and backed off, if you want a good bush load get some Norma 156 RN Lapua MEGA 156 or Hornady 160 RN they have a .377 BC and will penetrate a Deer end to end at 2400fps I have shot 1 hole groups with the Norma,
    the 6.5x55 is one of the easiest calibre's to get accurate loads for just stick with medium slow powder and medium to heavy bullets.
    My 18" barrel Swede does 3k with the 120 TTSX but needs a stiff load of 2209 to get it, running IMR7828 to get 2800 with 140 VLD's, have acquired some Hornady 160RN's for a point blank bush load, what powder works for you?

 

 

Similar Threads

  1. varget/2208 for 270 win 130 grain
    By Dino in forum Reloading and Ballistics
    Replies: 1
    Last Post: 21-02-2014, 04:53 PM
  2. 308 150 Nosler BT 2208
    By stug in forum Reloading and Ballistics
    Replies: 2
    Last Post: 17-09-2012, 08:27 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!