Thread: 708-X Bolt 16 inch is slow

I had a similar problem with 150 eldx in 7mm,
The first round would always go 2-3inches right and the other three would be tight.
I haven't figured it out yet, let me know how you get on please @ edunn

Originally Posted by muka88

I had a similar problem with 150 eldx in 7mm,
The first round would always go 2-3inches right and the other three would be tight.
I haven't figured it out yet, let me know how you get on please @ edunn

Will do mate. Did you end up using the load?

I haven't got around to it yet, i will pull the action out of the stock and torque it back down before i continue,
I found the harder i pushed them the smaller the groups where but started to get a tight bolt lift at 42gr of 2206h and put it in the to hard basket,
It is the only bullet i have tried and havnt been able to get sorted.
I have young kids at the moment so i dont have to much time for fine tuning, just went back to my proven loads and haven't had any issues.
Chers