Thread: Annealing machines?

Cool, keep us posted if you go ahead with it.

I'm multi-tasking with about 5 browser windows open at once looking at motor bike disc breaks, clutch pressure plates...basically anything pre-made that's round with holes around the circumference that could be purchased off trademe for next to nothing that may work as part of a rotary table? Getting lots of cool ideas...just gotta settle on a final design?

kj

Originally Posted by kimjon

Cool, keep us posted if you go ahead with it.

I'm multi-tasking with about 5 browser windows open at once looking at motor bike disc breaks, clutch pressure plates...basically anything pre-made that's round with holes around the circumference that could be purchased off trademe for next to nothing that may work as part of a rotary table? Getting lots of cool ideas...just gotta settle on a final design?

kj

The time in the flame must be controlled and constant. to much heat and it will travel into the body of the case and ruin it.

The video above with the case feeder has a link to here home built case annealer "op updated 10/28/12 with final pics and running video" - Page 1 - AR15.COM

I have a DXF file of the plate drawn up, just need to get it cut. I have a windscreen motor for the turner arm. Will run a speed controller from the like of Jaycar.

Interested to see others ideas here.