Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Alpine Terminator


User Tag List

Results 1 to 15 of 18
Like Tree8Likes

Thread: Case capacity question.

Threaded View

  1. #14
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    3,195
    Quote Originally Posted by Micky Duck View Post
    and your case SIZE will also make a difference...eg 223 case will matter more if 2 grns different capacity than a 270/36-06 sized case..the percentage of difference will be less
    now me personally have never really worried about it..call me lazy but my two main rifles for last 25 years have both been VERY unfussy.... whatever they were fed ,within reason, they both will group them in useful sized group.
    the most dramatic test we did was over bench to eliminate human factor and we fired 10 different loads through my .270 every thing from 110grns-160grn projectile size and group was easily covered by playing card 2" wide 3" high...if we had taken out the 2 hottest loads both 130grn...one winchester silver tip the other a norma SP the group was closer to 2".plenty good enough for sub 200yard shoulder shooting.
    Greetings Micky,
    The .270, 6.5 06, 6.5 x 55 and likely others have the happy knack of putting a range of projectiles through the same point of impact. My experience with the .308 Win shows that it is not in that group of cartridges. A 300 mm group would be more like it with each load tight but just in a different place.
    Regards Grandpamac.

 

 

Similar Threads

  1. 6.5 cm case capacity
    By WildBrad in forum Reloading and Ballistics
    Replies: 6
    Last Post: 09-02-2021, 12:25 AM
  2. 6.5 cm case capacity
    By WildBrad in forum Reloading and Ballistics
    Replies: 5
    Last Post: 06-02-2021, 05:22 PM
  3. 7mm08 case capacity
    By diana2 in forum Reloading and Ballistics
    Replies: 7
    Last Post: 21-07-2018, 09:51 PM
  4. Brass thickness vs capacity question
    By Grunta in forum Reloading and Ballistics
    Replies: 13
    Last Post: 22-05-2013, 09:14 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!