Thread: DIY Annealing

Much as you dislike the option of spending too much money on the process, I would urge you (and everybody else who does not yet understand the process) to read this https://www.accurateshooter.com/tech...les/annealing/
Then bookmark it so you can read it again!
It is an exacting process and if done properly will achieve the desired outcome. If not, it will achieve nothing, in that no correction has taken place, or worse, destruction of the case, which can not be undone. And you have no way of knowing!

I had a Ken Light machine but moved on to the NZ made AMP. No setting up, no naked flame/s, perfection every time.
If the cost seems to be too much, get some of your buddies together and buy one as a co-operative. Each to use as they need, and only necessary to buy the collets that each person has need of. Above all, understand what the process is and the possible dangerous outcomes.