Thread: Federal large primers

Yeah Cowboy06 it wasn't that they wouldn't ignite my headspace is fairly tight and when the bullet was home
in the chamber the bolt wouldn't close and I wasn't going to force it so I checked them and found the primer protruding out
I had just gone to a new box of primers so I should have checked the first ones of that box but didn't '' Bad move''
I did have some trouble with cci 200 a few years ago so went to 91/2 rem but I put the trouble with the cci 200 down to using a hand primer
tool because I still have that rifle and now use cci 200 or 91/2 in it with no problems although I prime with my press now and it seats the
primers right in to touch the bottom of the pocket where as the hand tool didn't
I have used Federal for years and never had one not go off I mainly use them in my 7mm rem mag and quiet happy with them