Thread: Getting a start in reloading

Originally Posted by Apocalypticaman

A good reloading bench for sure. Just built this today using recycled pallets

Attachment 268390
Attachment 268391

Nothing wrong with that, especially in the lounge!
Before you do anything else, get a 400 x 300 piece of steel plate and bolt it to the bench, then bolt your press right through the plate and benchtop. This will stiffen everything up and stop your benchtop from flexing.

@BK10

PM sent

Originally Posted by Bos

Nothing wrong with that, especially in the lounge!
Before you do anything else, get a 400 x 300 piece of steel plate and bolt it to the bench, then bolt your press right through the plate and benchtop. This will stiffen everything up and stop your benchtop from flexing.

A cross member might be a good idea too?

Originally Posted by BK10

Thanks for all your help, that will get me on my way as I'm a bit of a researcher before I do any practical things, Also cant wait to tell my misses that the reloading bench goes in the lounge!!

It'll be one heck of a converstion starter for sure. The 'yellowstone country cabin' style look. That's how I'm planning to sell it anyway ...

Originally Posted by BK10

Thanks for all your help, that will get me on my way as I'm a bit of a researcher before I do any practical things, Also cant wait to tell my misses that the reloading bench goes in the lounge!!

First thing to buy is a good Reloading manual, I know books are old school but they can be sitting open while you are working for quick reference.
have a look at what projectiles are easily available to you or that you want to use and buy their latest manual, they all have the steps required to turn out
excellent ammo, I am a Hornady fan and use only their projectiles and my cast ones, their latest manual is very good the loads I have tried are very safe,
also the Lyman 50th Edition is very good and has cast bullet info as a bonus.

What caliber(s) are you wanting to load for ?

Originally Posted by Apocalypticaman

Very.

At least you’re making the most of it. I wouldn’t think many have the luxury of a reloading bench in their lounge.

www.hodgdonreloading.com Is an excellent resource for all kinds of load data. I use it regularly.

Take your time, pay attention, and try to work with someone who knows what he's doing.

Originally Posted by longshot

At least you’re making the most of it. I wouldn’t think many have the luxury of a reloading bench in their lounge.

It's great. No cold nights handloading ammo mid winter

You have a lot of good advice and none of it is wrong.

Before you go and spend a lot of money, I would do the research and gain some basic knowledge, which is what you are trying to do. You are on to a perfect start. So, here is what I suggest - I'll look at your question differently and hope to add some value.

1. - BE SAFE

2. Why do you want to start reloading?

* If it is to save money, that is unlikely. You will end up buying various gear and some will not be used much. You will experiment a lot and waste components sometimes. You will shoot a lot more when reloading.
* If it is to make your own custom made ammo that shoots well in your rifles, then that is a great reason to reload. I really wanted to hunt and kill animals with ammo that I made myself. The step by step journey of developing an accurate load in my rifle that performs well on game is a unique kind of satisfaction.

3. Buy the Lyman manual - latest edition. Read the early chapter (not the load data) 3 times. You need to understand the variables of Case capacity, powder charge, powder burn rate, bullet weight, etc. on velocity and pressure. MOST IMPORTANTLY you need to understand how PRESSURE works. Pressure goes up exponentially. It is not a simple 1:1. You will not understand this in your first 1 year or even 2 years. (I may be wrong and you may already have a career in working with pressure vessels )

*As you start increasing your powder charge, there is a high probability that you could suddenly exceed safe levels and risk a blown primer or worse. The thumb rule I use is that Pressure goes up at two to four times the rate of increase in powder charge & velocity. What I mean is that if you increase powder charge by 1%, velocity might go up by 1% to 2% but pressure will go up by 2% to 4%. Things can change VERY QUICKLY from safe average loads to dangerous unsafe loads.

4. NEVER try to exceed published & tested loads / velocities. You will meet people who claim that they get 100 fps more than the book load and it is because they have a fast barrel and there is some magic technique they use etc. Just walk away and never discuss reloading with that person again.
* The Lyman manual has the BIG advantage of Pressure tested load data that other manuals do not have.
* An extra 200 feet per second is not going to help you kill a deer any better. Reliable safe ammo that is correctly zeroed in your rifle will get you a deer every time as long as you shoot it well and place the bullet in the right place. Some of my hunting loads have taken deer at 300+ meters and they are 150 fps slower than the book load.
* Unsafe ammo can get jammed in your rifle, damage your rifle, hurt you by blowing hot gas in your eyes etc. YouTube has many clips of rifles blowing up.
* I've loaded for at least 14 different rifle cartridges, and I have blown primers on 2 occasions - one was because I had seated the old Barnes X bullet too far out into the lands and that spiked pressure. The other was because I crimped one round and that again spiked pressure. As I said earlier - Pressure is a very complex variable and you need to really understand all the tiny factors that can make it spike into the dangerous territory.

3. I started with the Lee reloading kit. Never regretted it. After 30+ years I still make very accurate & safe ammo.
* I find Lee gear very reliable and of good quality. They are also very affordable when compared to other brands.
* You can always upgrade as you gain more experience and develop your own style, goals etc.
* The internet is full of people who rubbish Lee gear. It is also full of competition shooters who use Lee equipment and win medals.

Like what others have suggested, find a buddy / mentor but make sure he is not a high risk maverick.

Be safe & have fun.

@BK10

Made any progress?

@Oldbloke

Just been reading up and slowly getting my head round it

Get yourself an RCBS single stage press and go from there. That thing is like realestate - they arent getting any cheaper

Have you joined NZ Deer Stalkers club? You are sure to meet good people there, go to the club meetings, range shoots, club hunts etc.
Someone may agree to mentor you. You might pick up some second-hand gear at a bargain.

Originally Posted by BK10

@Oldbloke

Just been reading up and slowly getting my head round it

Originally Posted by BK10

@Oldbloke

Just been reading up and slowly getting my head round it

What caliber(s) are you looking at reloading for?