Thread: half-assed range report

Originally Posted by Normie

Gimp. That's pretty good speed out of the 6.5 Lapua? Is that load pretty hot? Weren't you getting similar speed when your old barrel was 24". 2800fps with the 140 should give you useable energy a ways out there? I hope to get about around 2800 from my .260 when it's built.

Yes, with basically the same load (previously 42.2 grains, probably a different seating depth.) I was getting almost exactly the same speed from a 24" barrel. Tussock cut his 26" barrel to 22" and lost no speed at all - his load is extremely similar to mine as well in regards to powder charge, I don't know about seating depth. 6.5x47 is very efficient. The 20" barrel with Roedale suppressor balances like a 24" with no suppressor and is only slightly (1") longer.


At that load there are no visible pressure signs - no ejector mark/stamping on the case head, primer still not flat. Some cratering but I get that at starting loads - the rifle has an oversize firing pin hole I think.

There is no published data for the x47 with 2209 but I imagine it is a fairly warm load. Temperature was low to mid 20's in the sun today so I'd say it'd be safe year round in Nz IN MY RIFLE WORK UP FOR YOUR OWN, PEOPLE.

It still has the "1000 foot pounds" at 650 meters (700 odd yards) at sea level if you believe in that, bullet should expand out to about 800 meters (1600f/s velocity barrier) at sea level.

No recoil with suppressor/good recoil pad. First 4 shots touching.