Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator DPT


User Tag List

+ Reply to Thread
Page 3 of 3 FirstFirst 123
Results 31 to 36 of 36
Like Tree24Likes

Thread: Hangfires with reduced loads

  1. #31
    Member
    Join Date
    Aug 2012
    Location
    helensville nz
    Posts
    4,382
    Quote Originally Posted by Grantp View Post
    Good to see a thread and advice on lighter loads and the dangers that exist - normally its all about overloading. Good stuff.
    Under loading is wayy more dangerous than over loading
    Because over loading will give you warnings that you’re pushing your luck
    Undloading in some cases will to but in other cases such as a flash over for example the 1st 5 could be fine then on the 6th karboomfa rifle in bits A friend of a friend Detonated his sako a few months back with a reduced load gone worng
    Cordite and Steelisreal like this.

  2. #32
    Member
    Join Date
    Jul 2017
    Location
    Whangarei
    Posts
    1,092
    Re Trail boss velocities. In my 243 with a 1:8 twist I can drive my 105/108 gr VLd's subsonic with about X gr. (1050 fps) or with XX gr I can drive a 58 gr Vmax at 2300 fps. I can put in up to 14 gr and drive the 105's at about 1700 fps.

    Sorry about the X's but my note book is in the shed and I don't want to get it wrong. I know I have gone as light as 8 gr but I'm reluctant to drop much under 10 gr.
    Zq

  3. #33
    Banned
    Join Date
    Mar 2015
    Location
    North Canterbury
    Posts
    5,462
    Quote Originally Posted by stug View Post
    Trailboss doesn't just give subsonic velocity. It will give velocities in the 1400-1700fps range depending on cartridge and projectile.
    Thanks for that info. That is something I didn't know and had never been told before, but now explains my results. The problem I had with velocity spread re Mickey Duck above for subs is that some loads will go trans sonic and noisey while others are completely suppressed and quiet. Makes it very difficult to get the right load going.

  4. #34
    Member Cordite's Avatar
    Join Date
    May 2017
    Location
    NZ Mainland (Dunedin)
    Posts
    5,478
    @Moa Hunter

    I scoop measure powder and find TB somewhat irritating - taking flight when you level the scoop. One could look for a narrow-mouth, relatively tall scoop to minimise fly-off variation, but then you have problems scooping with it!

    Bottleneck cases are better as there is less variation from this phenomenon - I stand them up in a cup and pour TB over them from an old flip-top ketchup bottle until filled, then level flat and pour into the destination cases. This also avoids compression variation then from how you scooped the TB into the measure as you don't scoop at all.

    Could buy an adjustable powder dispenser of course, but I heard TB can be temperamental with them.
    An itch ... is ... a desire to scratch

  5. #35
    Member
    Join Date
    Jul 2013
    Location
    Waikato
    Posts
    2,424
    I use the lee scooper for my trail boss loads,haven’t died yet.

  6. #36
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    22,742
    I use lee scoop AND THEN WEIGH...the beauty of them is getting your start point...you use SAME spoon you would use for your regular powder....funny as heck cause its the same one I use in 7.62x39mm and same for .223 as well....
    your STARTING load is by VOLUME NOT WEIGHT and you reduce from there.....sort of works out your first load will be 80-90% full case it will be supersonic usually.

 

 

Similar Threads

  1. Anyone run reduced 300wsm loads
    By Smiddy in forum Reloading and Ballistics
    Replies: 18
    Last Post: 27-04-2018, 10:17 AM
  2. 7mm-08 reduced loads
    By kiwijames in forum Reloading and Ballistics
    Replies: 17
    Last Post: 17-05-2016, 01:18 PM
  3. Reduced loads
    By 6mm ackley in forum Reloading and Ballistics
    Replies: 2
    Last Post: 28-02-2015, 02:18 PM
  4. Suppressor, reduced loads or smaller calibre
    By rusl in forum Firearms, Optics and Accessories
    Replies: 24
    Last Post: 18-08-2014, 09:33 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!