Hahahahahaha. R is before W or 7mm. Hahahahahaha
Printable View
Crazy blue people...anyway, what about making the most of the new .270 LR AB and necking it to fit those or maybe the standard 130gr projo's. Would be a nice short action all rounder with moderate speeds??
Its a great looking wildcat, and would suit the budget consoius loader and under 250 yards it will be devestating on deer.
Might be time to get a 7mm.
7FEH isn't that just a 7 IHMSA a 7mm based on a 250 savage (ie 22-250) case? if so i guess reamers are available off the shelf I looked at 7 IHMSA a while back and I remember reading that 300 savage brass is the preferred starting point as opposed to necking up 22-250 or 250 savage brass
I like the idea of a 7mm creedmore improved. shorter than a 7-08 so suits short actions like the rem model 7
I have this 7saum shortened 200 one working really well now after a few initial brass forming headaches 162 amax does 2930 out of 24 inch tube
http://i62.photobucket.com/albums/h1...ing_Layer1.jpg
7FEH isn't that just a 7mm IHMSA a 7mm based on a 250 savage (ie 22-250) case? were you trying to do something unique? I guess at least dies, reamers, and load data are all ready available federal used to sell brass too but they stopped....
a question re: 7mm IHMSA
This post was a reply to a tx that somehow ended up here. Couldnt delete.
No not yet, been playing with the "Houston warehouse" saum
21 3/4 inch barrel, 1.3 inch dia at the muzzle :)
Shooting very well :)
And still using the standard model 7 in saum
Any further ideas for a forum wildcat ?