Lyman make a 7mm universal seating die, as do a couple of other companies
Printable View
I took a 7 mm08 case and necked it up to 30 cal , does that count ? :)
http://uploads.tapatalk-cdn.com/2016...2d8d96c8f2.jpg
There have been some work on the 6.5x47 necked up to 7 mm and your wild cat will be very close to a 6.5 creedmoor necked up to 7mm.
I can post a picture with an a-max if you want. So you can dream about it tonight :-)
Disc World,Attachment 465417x47L,43grn BLC2 to the shoulder.120 ttsx
could i suggest a brass 12g case necked down to take a.17 pill.
not aufait with all this fancy chamberings ,but just a suggestion
.tell me to fuck off cause i know ya will!
Terry was a man before his time:sick:
Well, a Forum Elite Hunter cartridge that can be a little different but still practical might be a 6XC necked up to 6.5mm, 6.8mm or 7mm.
Easy brass to find and form if need be, can ai it if that spins yer wheels
7saum and 6XC
http://uploads.tapatalk-cdn.com/2016...2bc67553ef.jpg
22-250 and 6XC
http://uploads.tapatalk-cdn.com/2016...d3c769789b.jpg
220 swift, 6XC and 204 Ruger
http://uploads.tapatalk-cdn.com/2016...7b1eef05be.jpg
http://uploads.tapatalk-cdn.com/2016...4bc822610a.jpg
Different but still practical ??
Plenty of good 6XC brass around now.
Anyone contemplating or using a 7x47 yet ?
A 6.5 xc is so close to 6.5 creedmoor, it ain't funny .
well,its taken you blokes four years, but I have come up with the answer myself
Attachment 52290