Yep thats the one. Gives a loaded round at 2.795 with amax seated to the lands and boat-tail at the neck/shoulder junction
Printable View
Yep thats the one. Gives a loaded round at 2.795 with amax seated to the lands and boat-tail at the neck/shoulder junction
I vote .284 Win case shortened to say 47/48mm no improved shoulder necessary.
The short saum has been used for quite a while now in the F class world is it really something new?
would you need to shorten the SAUM? extend the mag box a bit .... shorten the neck a tad blow it out parrallel with a sharper shoulder and get very close to WSM capacity in a shorter case..
or the short 284... but its allready pretty parallel and has a pretty sharp shoulder so not too much modded...not cool enough :P
Or utilize the small primer 308 brass, blow it out shorten the neck.... look a bit different to std then
or just neck it down to 7-08 and it will do the job :wtfsmilie:
still like the 338 better :D
The more I read this the more I see an ugly twin of the 7mm08 getting born:TT TT:.Still a bit of fun though:thumbsup:
338 SAUM = ~338RCM?
.284 shortened with the improved shoulder... 40degrees?
So do we have a consensus on this yet? It seems .284 Win case shortened and either improved or not. I vote not improved, might have feeding issues then.