Thread: Leaver action black magic/ dark arts

Originally Posted by Tedz50

Attachment 205590Attachment 205591

I have attacked the use of a lever action from a different angle using it mainly for plinking and Hares and Wallabies at close range,
and so have used 110 grain rem bulk pack SP,s or 110 grain restrikes which go well in the 308,s as well.
I have found 30/30 very tolerant to bullet jump and in my Winchester feeding and accuracy to not be a problem.
My loads are light and Grandkids could not get enough of them.

Just wondering what sort of load you use with the m1 carbine projectiles?

Originally Posted by omark

Just wondering what sort of load you use with the m1 carbine projectiles?

I used Unique then AP70 using the same loads [about 8 grains] and now use trailboss.I use 2206 behind the Rem SP,s.I use 25 grains which is a light load but check your ADI charts before committing to using this data. I use these projectiles in the 308 at similar velocities and find they work well.

Forgot to add these are just plated soft lead so are treated like cast bullets

Thanks
I’ve been using unique but might back it off a little
Cheers

Originally Posted by omark

Just wondering what sort of load you use with the m1 carbine projectiles?

In the past I have used 36 grains of 4064 with the Sierra 110 gun rn carbine bullet. You need to use the Lee factory crimp die as there no cannelure. They were quick light recoicing and pretty effective.