Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator DPT


User Tag List

+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 15 of 19
Like Tree27Likes

Thread: Need help to settle and arguement

  1. #1
    Member
    Join Date
    Oct 2016
    Location
    otago
    Posts
    125

    Need help to settle and arguement

    So I need help.

    To cut a long story short I'm currently having an argument with my hunting buddy about how far out our rifles are. Mine's out, I took i big knock and needs sighting in I know that.

    Not sure if he's having sympathy pains but says at 100m he's 6 inches high. That's fine we both agree. However where the argument starts is if he's 6 inches high at 100m, how high is he at 200m? We both normally sight in spot on at 200m and for arguments sake are 2 inches high at 100m. Then the shit hit the fan and all sort of threats have been made.

    I'll admit I don't know enough about ballisitics and physics to work equations out, i buy factory ammo and use the info on the back of the box for bullet drop etc. By my reckoning if he's 6 inches high at 100m, and normal bullet drop of 2 inches over 200m, he should be 4 inches high at 200m. I'm hoping that I'm not a complete moron here but he reckons that at 2 inches high at 100m, he's 8 inches or more high at 200m. I'm struggling to see how, but like i said don't know loads about this, if someone could explain in simple terms who's right I'd really appreciate it. I'm hoping i'm on the winning side and save myself a box of beer.

    If it helps, he fires a 6.5X55, hand loads but I don't know bullet weight/grain weight.

    Cheers

  2. #2
    Member
    Join Date
    Apr 2015
    Location
    Feilding
    Posts
    107
    You are right.

  3. #3
    Member
    Join Date
    Feb 2012
    Location
    Rapa
    Posts
    1,019
    OK so I ran some numbers for a 140gr SP at 2700fps. If its 6" high at 100m then at 200m its a bit over 7" high before dropping to be zeroed at 300m.

    Reason being is the bullet (in this example) reaches the top of its trajectory curve around 175m before starting to drop.

    Same bullet and velocity shooting 2" high at 100m should be zeroed at 200m. Top of trajectory in this case is at around 100m.

    Assuming a scope height of 1.6" above the rife bore.
    Last edited by NZShoota; 23-11-2017 at 08:34 PM.

  4. #4
    Caretaker - Gone But Not Forgotten jakewire's Avatar
    Join Date
    Dec 2011
    Location
    here
    Posts
    7,477
    Lets just say his hand load is a 140 gr sst
    and
    lets just say he's just over 2700fps
    If this is the case or close and he's 6 inches high at 100yrds he'll have roughly a 350yrd zero which will put him just over 8" high at 200 yrds.

    Even if he's using a standard interlock type 100fps slower he's still zeroing about 320 yrds and at 6" high at 100 puts him over 7" high at 200
    Quis custodiet ipsos custodes?

  5. #5
    Sending it Gibo's Avatar
    Join Date
    Feb 2013
    Location
    The Hill
    Posts
    23,210
    You are right but by my reckoning 6" high at 100 aint good for f all
    sneeze and PERRISCICABA like this.

  6. #6
    Gone................. mikee's Avatar
    Join Date
    Aug 2012
    Location
    Nelson, New Zealand
    Posts
    9,690
    Quote Originally Posted by Gibo View Post
    You are right but by my reckoning 6" high at 100 aint good for f all
    Um....ah ......... its all good if you want to miss that 100m headshot
    Blisters likes this.
    All those with dogs waiting no longer fear death. Those with many dogs waiting even welcome it in it's time.

  7. #7
    Member
    Join Date
    Oct 2016
    Location
    otago
    Posts
    125
    Quote Originally Posted by NZShoota View Post
    OK so I ran some numbers for a 140gr SP at 2700fps. If its 6" high at 100m then at 200m its a bit over 7" high before dropping to be zeroed at 300m.

    Reason being is the bullet (in this example) reaches the top of its trajectory curve around 175m before starting to drop.

    Same bullet and velocity shooting 2" high at 100m should be zeroed at 200m. Top of trajectory in this case is at around 100m.

    Assuming a scope height of 1.6" above the rife bore.

    Bollocks

  8. #8
    Member
    Join Date
    Oct 2016
    Location
    otago
    Posts
    125
    Quote Originally Posted by jakewire View Post
    Lets just say his hand load is a 140 gr sst
    and
    lets just say he's just over 2700fps
    If this is the case or close and he's 6 inches high at 100yrds he'll have roughly a 350yrd zero which will put him just over 8" high at 200 yrds.

    Even if he's using a standard interlock type 100fps slower he's still zeroing about 320 yrds and at 6" high at 100 puts him over 7" high at 200
    Bollocks, looks like I owe a box of beer and have to put my tail between my legs. Might just wait till he's back from a trip on sunday before telling him though
    Tikka7mm08, Maca49 and Boaraxa like this.

  9. #9
    Member Puffin's Avatar
    Join Date
    May 2012
    Location
    Porirua
    Posts
    976
    Quote Originally Posted by Hades View Post
    You are right.
    The correct response in any argument for the married man - irrespective of validity.
    Last edited by Puffin; 24-11-2017 at 08:37 AM.
    JoshC, Uplandstalker and Sideshow like this.

  10. #10
    Member
    Join Date
    May 2015
    Location
    Rolleston
    Posts
    559
    Think of it this way - to move up four inches at 100 you’re looking at 4moa, or 16 clicks. 4moa at 200 will be 8”, so you’ve come up 8” from your original zero. If your original 100 zero was 2” high, and 0 at 200, you’ve come up the equivalent of 4moa, and therefore are now 6” high at 100, and 8 at 200. Bobs your uncle - no need for fancy maths!

  11. #11
    Member
    Join Date
    Nov 2014
    Location
    Tasman
    Posts
    680
    He is wrong you and I both know that! He will miss a good bull this weekend and blame his rifle it is shooting 139 gr interlocks at a very mild 2550fps :-)



    Sent from my HP 8 using Tapatalk

  12. #12
    Member andyanimal31's Avatar
    Join Date
    Dec 2011
    Location
    Makakahi road Raetihi
    Posts
    3,489
    But a nightforce and you will never have to worry about your scope been knocked out.
    Bending the barrel is a different story!

    Sent from my SM-G950F using Tapatalk
    Rich007 likes this.
    My favorite sentences i like to hear are - I suppose so. and Send It!

  13. #13
    Member Puffin's Avatar
    Join Date
    May 2012
    Location
    Porirua
    Posts
    976
    Pictures are good. For the spread of angles at which we launch our bullets through choice of zero - typically all within 1 degree of horizontal - the shape of the trajectory for a given bullet & muzzle velocity remains substantially unchanged.
    This fixed shape of trajectory, commonly described in figures of fall below a horizontal line of launch - drop data - may then be used to predict the bullet's path by rotating the trajectory until it passes the line-of-sight for any chosen zero distance.

    Bigred, the info you provided in your initial post gives the blue trajectory below: zeroed at 200, 2" high at 100, with the scope line-of-sight 1.5" above the bore. Height above & below the line-of-sight is on the y-axis, distance out from the rifle on the x-axis, so the bullet leaves the muzzle 1.5" below and is sent upwards through the line-of-sight, returning back through it at the chosen zero. G1BC=0.5, MV=2695ft/sec is one combination that would get you close if distance is in yards.

    Name:  trajectory.jpg
Views: 333
Size:  49.3 KB

    Your mates bullet follows the red path. And because he shoots 4" higher than you at 100, his bullet will be EXACTLY 8" higher than yours at 200, 12" higher than yours at 300 etc. - as 7x64 indicated in an earlier post. I've assumed here that your mate is shooting the same bullet & MV as you and only his chosen zero is different (around 340yds depending on exact BC & MV combination), so the curve of the path of the bullets is the same for both.

    On first inspection the shapes of the trajectories may not look the same in the first graph, but this becomes more apparent when comparing to the lines of rotation pivoting about the muzzle, added in the second drawing below.

    Name:  trajectory II.jpg
Views: 317
Size:  53.6 KB
    gadgetman, Rich007, spada and 1 others like this.

  14. #14
    Member Cartman's Avatar
    Join Date
    Aug 2013
    Location
    wanaka
    Posts
    2,052
    Fuck that shit hurt my head

    Sent from my SM-G930F using Tapatalk
    sneeze and hotsoup like this.

  15. #15
    Member sneeze's Avatar
    Join Date
    Dec 2011
    Location
    nelson/marlborough
    Posts
    3,357
    Quote Originally Posted by Cartman View Post
    Fuck that shit hurt my head

    Sent from my SM-G930F using Tapatalk
    Was just saying to my mate the other night as we dragged a boar back to the truck "got lucky with the lines of rotation pivoting about the muzzle on that shot.
    gadgetman, Friwi, Cartman and 1 others like this.
    "You'll never find a rainbow if you're looking down" Charlie Chaplin

 

 

Similar Threads

  1. settle down .........
    By kotuku in forum Game Cooking and Recipes
    Replies: 4
    Last Post: 15-04-2015, 08:43 AM
  2. Got the scope sorted... now just need to settle on either 6.5x55 swede OR 7mm-08...
    By Proneshooter in forum Firearms, Optics and Accessories
    Replies: 32
    Last Post: 05-06-2014, 10:24 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!