Thread: Projectile performance

Originally Posted by TeRei

https://www.jaycar.co.nz/20-piece-mi...1-6mm/p/TD2406

Is this any advantage? Go up in gradations or go straight to 0.08mm? Do I need a needle drill or pin vise? Have ordered a pin vise.

I had to google pin vise but it appears needle drill and pin vise are the same thing.
I just use the 0.8mm bit, dont step up in increments. All you're doing is clearing any of the jacket thats folded over to make sure the tip is open. I just go until I touch the lead core.