Thread: What Have You Loaded Today

Had a couple of mates come around last night for a reloading session. Both have 6.5x55. One rifles on a new load AR2209 and 143gr ELD-X, will here how he gets on tonight after a day at the range. My other mate I’m helping him setup a second hand press, gear, etc and dies but all he’s missing a shell holder so it a next time job now until I’ve got some free time.

Originally Posted by makka

Not me, but a mate has loaded them up for the rifle we have been building. 5.6x57, 75gn eld-m with 43gn of 2213 for some test firings. Beside a 223 for comparison
Attachment 249335

What projectiles are the yellow tip 223?

They look pretty cool

Making slow progress (pun intended) with a 7mm08 load, 2209 and Nosler 140gr BT's

Took the new batch of 73g to test yesterday. These bullets just perform. 4 shots at 100m.

Originally Posted by 7mm Rem Mag

What projectiles are the yellow tip 223?

They look pretty cool

Looks to be those limited run hornady z-max. Made especially for zombies haha

Loaded up some load development 6.5 CM rounds yesterday .
My chosen load is

Hornady Brass
CCI 200 Primers
ADI 2209
Hornady 129gn SST projectiles ( oal 72mm / 2.835 in )

41.5 gn of h2209 produces 16mm average groups at 100m . I found that combination very quickly when doing my initial testing so didn’t really do much more experimenting .
In that initial test my max charge was 42.3gn ( no pressure signs) which although good wasn’t as accurate as the 41.5gn .
With that in mind I thought that I’d try to bump up the charge to 42.7gn and see if the groups tighten up again .
So I’ve loaded 9 rounds ( 3 x 3 shot groups / sporter barrel that heats up quickly) of 42.7gn and will test them side by side with the 41.5gn loads to give them a fair comparison ( same day / environmentals etc )

Just formed 3 cases and loaded 1 dummy round in 45-60 to check the theory on a current project



Proof of concept to see if forming 45-60 and cutting the chamber with my 45-70 reamer was going to work

Originally Posted by Dr. Death

Making slow progress (pun intended) with a 7mm08 load, 2209 and Nosler 140gr BT's Attachment 249401

Have you tried AR2208? it goes faster for me than 2209 with the 140g (with less powder).

Nah, I havnt, I have noted its the more go-to powder for the calibre, I just had the 2209 on hand when I started, I'm pretty happy with the load for now, but will give the 2208 a run at some stage. Seems to be doing the damage for now.

Originally Posted by 7mm Rem Mag

What projectiles are the yellow tip 223?

They look pretty cool

55gr Zmax, same as a Vmax just a different colour tip

Silly question, but does anyone here also just make a side batch of sinkers for fishing from time to time when casting?
just wondering if a std BHN 13 hardness mix of lead is ok for the sinkers or is it too soft?

Originally Posted by akaroa1

Just formed 3 cases and loaded 1 dummy round in 45-60 to check the theory on a current project

Attachment 249603

Proof of concept to see if forming 45-60 and cutting the chamber with my 45-70 reamer was going to work

Is this with a top end load capable rifle? I'm already a bit shy to load my marlin SBL45-70 past 46gns of anything peppy so i'd only waste any extra case capacity i feel.