Thread: Show us your Varmint rifles

Mine is a Sako 85 Laminated Varminter, bored out to 22-243win, scoped with a VX3 4.5-14x40 CDS.

Sako 75 .223 8" twist
Scope is a VXII 4-12AO
Reflex T8 can
Shoots 65gn Gamekings and 69gn Matchkings to the same POI.

Kimber 22 250, not with the Grand Slam in the photo but Now with Leupold VX3 4.5x14 LR 30MM with M1 Turrets.
Shooting Targetz 52gr.

20 Tactical. Built on a Tikka 595 Continential Varminter. True Flite Ultra Match barrel, Gunworks supressor. Now has a Swarovski Z6 2.5-15x44 scope on it, scope sits much lower as I have got rid of the rail and used low Optilocks instead. I like it a lot... Factory Lapua brass available (via Dakota), mine pushes out 40gr vmax's at just under 4k fps using 26gr of powder...

I never got past a rimfire for the little stuff,anchutz 17hmr, wears a 4200 4-16x40 and a bunney buster can now.Its great just grabbin a box of ammo and shooting not giving a thought to where your brass is going.

Nice rifles guys:have a nice day:

Steyr Provarmint does the business as my "varmint" rifle - usually use the .243 (and lately the .44 Mag) though

Keep umming and arring about selling it, its a very nice thing but doesn't get out nearly enough?

Originally Posted by The Claw

20 Tactical. Built on a Tikka 595 Continential Varminter. True Flite Ultra Match barrel, Gunworks supressor. Now has a Swarovski Z6 2.5-15x44 scope on it, scope sits much lower as I have got rid of the rail and used low Optilocks instead. I like it a lot... Factory Lapua brass available (via Dakota), mine pushes out 40gr vmax's at just under 4k fps using 26gr of powder...

What do you think of the Z6 Claw??? had me eye on this or the Z5,,,who did you end up getting it through??

Really like it. Brilliant glass, good reticle for what I'm using it for (BR-1 I think it is). Nice zoom range for varminting 0-450m. Had initially bought it for another rifle that I was going to dial a bit, but decided to get something a bit more reliable for that. Bought it from Euro Optic, was a demo unit. A Z5 3.5-18 would be a nice choice to I reckon (for a varminter thats not going to dial)

Very nice kit there guys ,some of you must be fatcats and loaded or just like crazyman ,a straight out gun nut .

My ruger 10/22 wears a hogue stock, SAK silencer & Mueller APV



And my latest acquistion just getting it "run in" having only shot a couple of hares at 200m and the odd smelly.

Jongmans .223 with 1-8 and 1-12 barrels (dont ask) MAE suppressor and now has a 3-15 minox,

Shoots 65 gamekings, 75 grn VLD's and Hornady 55 varminters very well.

Have a mod 2 brno .22 and a Voere in .22 magnum for closer in.

G'Day Fella's,

Here is some images of my purpose built Long Range varminter, "Hopper Stopper".
It is based on an old Rem 700 that has been completely trued and squared up, then had the action sleeved.
It has a re-worked Remington 700 trigger that has been converted to a 3 lever design and breaks at 2 ounces.
It is set up as a switch barrel rifle, so you can have a series of barrels (and bolts), that will fit the one action.

At the time these images were taken, the only barrel I had for it, was a Maddco, #7 in .22-250AI (tight neck), with a 1-14" twist.

Here is an image, showing it being used to hit the occasional Rodent, at a series of warrens amongst the Gum trees, at around 500 meters
All the gunsmith work, was done by John Giles of www.pseco.com.au many years ago.

This rifle is so accurate, if I miss what I'm aiming at, I'm not able to blame the rifle!!!

Doh!
Homer

Originally Posted by nor-west

Jongmans .223 with 1-8 and 1-12 barrels (dont ask) MAE suppressor and now has a 3-15 minox,

Shoots 65 gamekings, 75 grn VLD's and Hornady 55 varminters very well.

Have a mod 2 brno .22 and a Voere in .22 magnum for closer in.

I need to see this thing in person.

Heres mine Tikka M590 26" Shillen 1-8 twist 22-243.