Thread: Boyds Stocks

Yeah I was surprised,I might have a look at yours Gadgetman, may have sorted a local stock too but would like to see the boyds (no rush on it)

Originally Posted by Tussock

You need one of those Savage target actions with the left hand bolt, right hand eject option. Make a cool half left handed, half right handed thing.

Also, what about making yourself a mock up of a stock you want, then sending it to Senator to get made?

Cheapest option, do what I did to that 17HMR (but less rough).

I have a piece of timber I was going to carve into a stock but more as a decorative piece than for use (type of thing you wouldnt want to scratch)
I'll just hack into my tikka stocks for now, get what I want then send it to someone to make a nicer version of I think

My sons 795 stock arrived with no dramas other than being opened. Cheap and easy in the end.

Originally Posted by R93

My sons 795 stock arrived with no dramas other than being opened. Cheap and easy in the end.

Yep..so did mine on Thursday and friday I had 2 Mauser triggers delivered from Boyds

Originally Posted by Steveh054

Yep..so did mine on Thursday and friday I had 2 Mauser triggers delivered from Boyds

Which ones did you get? if you get the side safety one does this make the bolt tab one redundant?

Originally Posted by veitnamcam

Which ones did you get? if you get the side safety one does this make the bolt tab one redundant?

I got the Bold Optima with side safety because it makes the bolt tab redundant, I now have 3 and find them every bit as good as Timney

Its a large ring thats about all I know

Originally Posted by veitnamcam

Its a large ring thats about all I know

I can put up photos of the trigger at all angles if that is any use to anyone

Originally Posted by Steveh054

I can put up photos of the trigger at all angles if that is any use to anyone

What model(s) dont they fit?

Originally Posted by veitnamcam

What model(s) dont they fit?

Large ring Mausers have had so many "modifications" trigger wise over the years that I simply can't remember which models the triggers don't fit but definately Interarms MK X with double set triggers, ( I just tried mine) I'm going to be doing a Zastava tomorrow so will let you know how that goes, the triggers will fit anything ex military if they haven't been messed with by some home handy man type person, if they have a standard trigger setup then the Bold triggers will fit

Originally Posted by Tussock

Abort abort!

Richards Microfit is not a real thing! It's just a fake website. No rifles stock will ever come.

I'm waiting on a 17HMR stock from 2008

they just sent me a email earlier this week

Sorry its a 25.00 set up fee.

On 9/18/2012 12:32 PM, Bill wrote:
A 258.00 set up fee? is this a typo?


Date: Tue, 18 Sep 2012 01:13:37 -0700
From: sales@rifle-stocks.com
To: bill
Subject: Re: brno 600 7x57 stock order

The stock will be 119.00 plus a 258.00 set up fee. The shipping to NZ will be 49.00, the stock will have a 96% inlet. You will need to do the final inlet sand and finish the outside. The current lead time will be eight to ten weeks to complete.
Helen

On 9/16/2012 5:52 PM, Bill wrote:
Hi sales department

Id like to order a custom rollover stock for my 7x57 brno 600
it has a hinged floorplate

for colour I would like black laminate

I would like the order shipped internationally to New Zealand

the address is

Delete all my private details, but would you like me to ask where you stock has got to?

Originally Posted by Bill999

they just sent me a email earlier this week

Sorry its a 25.00 set up fee.

On 9/18/2012 12:32 PM, Bill wrote:
A 258.00 set up fee? is this a typo?


Date: Tue, 18 Sep 2012 01:13:37 -0700
From: sales@rifle-stocks.com
To: bill
Subject: Re: brno 600 7x57 stock order

The stock will be 119.00 plus a 258.00 set up fee. The shipping to NZ will be 49.00, the stock will have a 96% inlet. You will need to do the final inlet sand and finish the outside. The current lead time will be eight to ten weeks to complete.
Helen

On 9/16/2012 5:52 PM, Bill wrote:
Hi sales department

Id like to order a custom rollover stock for my 7x57 brno 600
it has a hinged floorplate

for colour I would like black laminate

I would like the order shipped internationally to New Zealand

the address is

Delete all my private details, but would you like me to ask where you stock has got to?

I sent them three emails, no reply. I saw a microfit for sale on trade me the other day so somebady managed to get one somehow

Originally Posted by horihunter

I sent them three emails, no reply. I saw a microfit for sale on trade me the other day so somebady managed to get one somehow

My first order from Richards took 4 weeks to get here and was a drop in fit but the next 2 haven't arrived after 3 years but I haven't been charged for them, they are fucken' unreliable, even if they bother to answer their emails they are quite vacant in their replies, it is hit and miss if they answer their phone and the 3 times I did get hold of them, they may as well have just told me to get fucked as their customer service is piss poor

did they refund you?

Hmmmmmm.................................... any other suppliers you would recommend?