Thread: Gun Porn, show off your new toys

Originally Posted by SPEARONZ

Attachment 195944

Danny’s onto it. Heres the 225 eldm dummy round next to the 162 in 7/08. Bit of a jump in performance I imagine.

I can only imagine how effective those 225s would be on game after seeing what the 150s do to deer. I might have to grab a sample pack some time and try them in my 300 RUM, although the 210 Bergers work pretty well too.

Originally Posted by craigc

I can only imagine how effective those 225s would be on game after seeing what the 150s do to deer. I might have to grab a sample pack some time and try them in my 300 RUM, although the 210 Bergers work pretty well too.

Could swap ya 20 or so if you just want to run a ladder

Kimber Classic Select Limited Edition, 6.5cm, Swaro Z3 3-10, bang on 3kg. Happy days

Originally Posted by Ryan_Songhurst

Kimber Classic Select Limited Edition, 6.5cm, Swaro Z3 3-10, bang on 3kg. Happy days

Attachment 196326
Attachment 196327

Be careful with that. If you take it out in the rain the stock will swell up and all the black bits will go orange. No where near enough plastic on it.

Originally Posted by Ryan_Songhurst

Kimber Classic Select Limited Edition, 6.5cm, Swaro Z3 3-10, bang on 3kg. Happy days

Attachment 196326
Attachment 196327

One of these just popped up on trade me, nice looking rifles alright.
https://www.trademe.co.nz/a/marketpl...3?bof=ZsL15JhT

Very nice

Sent from my CPH2145 using Tapatalk

Lovely

Very nice, pretty good weight with the wood stock. What's the projectile of choice for it?

Originally Posted by DBD

Very nice, pretty good weight with the wood stock. What's the projectile of choice for it?

I’ll do some load dev over the weekend only picked it up this evening. Have 140 and 147 elds to try

Finally had this out of the safe and starting load development. Seems to like 66.5-67 of r26 and 180eldm
Built by Dean through camwsm, top notch work.

7mm blaser, defiance rebel, manners Eh1, trigertech special, nightforce NX-8

Tirau,, how did you get on finding brass/ dies for this???

Originally Posted by matagouri

Tirau,, how did you get on finding brass/ dies for this???

Been buying them over the last couple years, got 50 brass last year payed $350 for it. First 50 I got was under $200. Workshop innovation should be able to get the dies.

I’ve also read Norma has discontinued the brass, yet to be confirmed. If that’s the case kicking myself should have built a LRM

Originally Posted by Tirau

Attachment 196416Finally had this out of the safe and starting load development. Seems to like 66.5-67 of r26 and 180eldm
Built by Dean through camwsm, top notch work.

7mm blaser, defiance rebel, manners Eh1, trigertech special, nightforce NX-8

That brass if you look after it should last the barrel. if its hot not so much. very cool build pretty much the same as my 30 nosler. I like the stock colour, is it straight carbon fibre or is it something else? (scorched earth). The 7lrm would also be regreated as it will be close to the 7mm prc they are adjusting the reamer for according to aaron davision from gunwerks in the us.

Originally Posted by Tim Dicko

That brass if you look after it should last the barrel. if its hot not so much. very cool build pretty much the same as my 30 nosler. I like the stock colour, is it straight carbon fibre or is it something else? (scorched earth). The 7lrm would also be regreated as it will be close to the 7mm prc they are adjusting the reamer for according to aaron davision from gunwerks in the us.

The blaser mags very efficient and not very hot to get a 180 doing 3050 the best choice in my opinion. 7 prc? Is this the Saami legitimate cartridge? Theirs all ready plenty of unofficial 7 300 prc varieties

Here's one of my new toys, after going against the "every cunt has a T3" flood for a few years I'm coming back to em & have two lol, they are nice bit's of kit & nowadays seem to be the bolt action equivalent of an AR with all the extra shit you can easily get & stick on them, plus they come in some many funky colours hahaha

T3 Alpine in 6.5prc ( thanks to Ken @ 55Six ) put a new sharper pistol grip & cheek riser on her, Illuminated 3.5 -18 Z5 ( I like the improvements on this scope ) & off she goes, shoots factory ammo & reloads mint