Thread: How to get your rifle to shoot less than MOA

Originally Posted by Steveh054

As above.. Today I had very little to do so I took my recently bedded .270 BSA Majestic with Truflite Premium Barrel fitted by Gunworks to a trued action, never took my camera but the results were astounding!!! First I fired a 3 shot group which measured 1" and I thought "fuck that's piss poor" but after seeing on one these threads on the forum recently of a 1/4" sporting rifle, I thought I would have a go at matching that, so I fired 3 one shot groups and fuckme they were all under 1/4" and that is how you shoot 1/4" with a sporting rifle. So all you Guys that are getting 1/4" and less 3 shot groups consistently with your sporter barrel and 3-9 x 40 Nikko scope I say..........."FUCKING BULLSHIT" you are. That is benchrest accuracy!! and the majority of shooters cannot even get close to that kind of accuracy shooting off the bonnet of the truck or a rolled up shirt on the ground, so get real ya bullshittin' pricks.
I now await the flack from the bullshit brigade
Today I am bored

you're not alone there cobba. I'm currently working on a Remington 5R Milspec in .300 Win Mag Calibre (hence my name!). My bullets are seated to within .0005" of each other, the bullet run-out is typically <.002" with quite a few "tipping the scales" @ as low as .0005" and yet I'm still getting among the 1 & 1/4" to 1 & 3/4" groups at 100m on a good day, and I've never owned or loaded for any of my firearms that have shot less than that!

Not unlike "Spanners" grouping, last weekend I fired a three shot group as good as his, but then the fourth shot went wider and the fifth shot opened the group right out to 1 & 1/2"!

So it beats the hell out of me how they do it!