Thread: How to get your rifle to shoot less than MOA

As above.. Today I had very little to do so I took my recently bedded .270 BSA Majestic with Truflite Premium Barrel fitted by Gunworks to a trued action, never took my camera but the results were astounding!!! First I fired a 3 shot group which measured 1" and I thought "fuck that's piss poor" but after seeing on one these threads on the forum recently of a 1/4" sporting rifle, I thought I would have a go at matching that, so I fired 3 one shot groups and fuckme they were all under 1/4" and that is how you shoot 1/4" with a sporting rifle. So all you Guys that are getting 1/4" and less 3 shot groups consistently with your sporter barrel and 3-9 x 40 Nikko scope I say..........."FUCKING BULLSHIT" you are. That is benchrest accuracy!! and the majority of shooters cannot even get close to that kind of accuracy shooting off the bonnet of the truck or a rolled up shirt on the ground, so get real ya bullshittin' pricks.
I now await the flack from the bullshit brigade
Today I am bored

Naaa Steve mate, is piss easy...

All you do is shoot a benchrest group at like 10m, then nek minute you move the target to 100 yds and start congratulating yourself on being such shit-hot shooter

Originally Posted by ebf

Naaa Steve mate, is piss easy...

All you do is shoot a benchrest group at like 10m, then nek minute you move the target to 100 yds and start congratulating yourself on being such shit-hot shooter

Aaah the plot thickens lol

No-one ever took me up on my challenge to shoot 5x 5 shot groups on the same bit of paper and see what the average was.

Originally Posted by gimp

No-one ever took me up on my challenge to shoot 5x 5 shot groups on the same bit of paper and see what the average was.

Cos that's 40-50 bucks just to say na na na na na to a self confessed internet gimp.

I posted some 3 and ten shot groups a while back.

Now i have a cheap as factory 223 and some cheap as factory 223 ammo i will do it just for you mister gimp.

Sent from my GT-S5360T using Tapatalk 2

Originally Posted by veitnamcam

Cos that's 40-50 bucks just to say na na na na na to a self confessed internet gimp.

I posted some 3 and ten shot groups a while back.

Now i have a cheap as factory 223 and some cheap as factory 223 ammo i will do it just for you mister gimp.

Sent from my GT-S5360T using Tapatalk 2

You'd think if people cared so much about ~*my submoa rifle*~ they'd be happy to spend the 28 bucks to actually test it to a vague degree of significance

Originally Posted by gimp

You'd think if people cared so much about ~*my submoa rifle*~ they'd be happy to spend the 28 bucks to actually test it to a vague degree of significance

So many 3 shot groups out of a hunting rifle with a 3 shot mag on many different days both clean and dirty cold and warm always measuring under half MOA at 100,200 and 300m is still not a "sub MOA rifle" cos I didnt shoot 5 x 5shot goups with it on the same day??? WTF would that prove?
That i have too much money and time?

And the only reason I even shot so many groups with it is cos I am so rich I have to musical chairs with scopes on rifles.

Originally Posted by gimp

You'd think if people cared so much about ~*my submoa rifle*~ they'd be happy to spend the 28 bucks to actually test it to a vague degree of significance

Or maybe they couldn't give a toss if some guy on the inter net doesn't believe them.

Originally Posted by veitnamcam

Or maybe they couldn't give a toss if some guy on the inter net doesn't believe them.

then why are they measuring it to the third decimal place and telling some guy on the internet about it if they don't care??

Dam mine will only shoot .308!

Sent from my GT-S5360T using Tapatalk 2

Originally Posted by veitnamcam

Dam mine will only shoot .308!

Yup VC, no matter how much I try, just can't get the frigging 5 shot groups below .308

Maybe when I get a 22-250 things will improve

Originally Posted by ebf

Yup VC, no matter how much I try, just can't get the frigging 5 shot groups below .308

Maybe when I get a 22-250 things will improve

I know what your problem is....you forgot to subtract calibre size, so there you go, you have a 0.00" group!

I find I get the smallest groups if I just don't shoot at all. The shot-to-shot deviation is non-existant.

Originally Posted by gimp

I find I get the smallest groups if I just don't shoot at all. The shot-to-shot deviation is non-existant.

Gimp...that is cheating!!