Thread: Kiwi made Howa mini ultralight chassis a reality?

Out of interest - is there an option out there for the takedown design that you had shown early on in the Elude development process? Just a very interested observer, no funds available yet haha. Thanks

I wish you hadn't shown that there is a nightforce in the style that I'm wanting to do wingman. Thats going to be expensive....

I think Hardies he them in stock. You are welcome.

here is a photo of the 10/22 Ruger in its chassis .great to have the same fitting on it to be able to swap out bits

now that IS different.

Originally Posted by Wingman

Or... chop it.
There are only benefits from running a short compact Grendel, once you go short you'll never bother with a long barrel again. The animals won't know the difference at the ranges these small cartridges were inteded to be used at.
Even a longer 14.5" Grendel barrel gets 2500fps with 123gr.
"Long barrels are for getting inefficient old school magnum cartriges full of slow burning powder up to speed"
The Grendel runs about the same hunting energy as a .243win only it runs slower with a heavier bullet. As long as you use light jacketed varmint/tipped target bullets it will kill just like a .243win. I have dropped animals with my 10.5" barrel to a little over 500m however the Grendel really is a 300m cartridge unless you really trust yourself to hit a 6" target out at 500 consistently.
Know your rifle, know your ballistics and know your limits.

Good effort on the goats, another customer just sent some pics of his first deer with his Elude custom 6.5 Grendel too.

What powder are you using to get 2500 from 14.5 inch. I can't even get that from my factory length howa

ADI BM8208 is the grendels best friend.

Originally Posted by Wingman

ADI BM8208 is the grendels best friend.

Time for me to start reloading for the Grendel with BM8208 then! I have been hesitant chopping as I am only getting 2470fps out of the 22in I have! If I can get better than that out of 14.5in, then why not!

Originally Posted by kiwi-adam

Time for me to start reloading for the Grendel with BM8208 then! I have been hesitant chopping as I am only getting 2470fps out of the 22in I have! If I can get better than that out of 14.5in, then why not!

ah yes but what will you manage with the 22 inch????

Originally Posted by Wingman

ADI BM8208 is the grendels best friend.

Yup been using that. 27.5 grains for 2450. Maybe it's my barrel

My 14.5" trueflight barrel got 2550fps with 123gr Lapua scenars with 27.8gr of 8208.

You might find youd get more speed with a slower powder like Aliant power pro varmint in that longer barrel. The 8208 is best for short barrels. I run 28gr with 120gr eldms and 120gr targex in 12.5" the factory howa barrels I've tested which gets about 2320fps

@Wingman did you go to Talley extended rings or just standard? You had previously mentioned that you’d fitted Talley ultra-lows. Not wanting to put a rail on mine but want to make sure the scope will push forward enough.
Having just said that, I guess I’ll have to consider the rail option if I run a red dot and then will need another set of rings for a scope for ease of interchangeability.

Just depends what suppliers have in stock.. stock levels seem low or unavailable on many products

I hear what you’re saying. My first 30mm tube scope, which is a lot more common nowadays, is making it harder. The one downside of living here is the inability to just pop down to the shop to browse. Have to do as much research online as I can then get on the phone to check for stock. Hopefully I’ll get to Invers next week and pick up what I need but I try to always have a backup plan.

Originally Posted by Sidetrack

I hear what you’re saying. My first 30mm tube scope, which is a lot more common nowadays, is making it harder. The one downside of living here is the inability to just pop down to the shop to browse. Have to do as much research online as I can then get on the phone to check for stock. Hopefully I’ll get to Invers next week and pick up what I need but I try to always have a backup plan.

I found a set of 30mm lows in my draw from when I ordered a bunch to find out the best set up for mine. Went with the ultra lows but they are too low for most people.
These are available if they get you running