The Lever Aficionados Thread

[MSL]

That one is still as is at the mo


Sent from my iPhone using Tapatalk

[yendor]

I am new to this site and unsure of how it all works. I have .307 lever winchester in pretty fair condition. I have a few boxes of good ammo and a little bit of used brass Is there anywhere I can get reloads?

[ZQLewis]

I am new to this site and unsure of how it all works. I have .307 lever winchester in pretty fair condition. I have a few boxes of good ammo and a little bit of used brass Is there anywhere I can get reloads?

Thats an unusual one, can we see a picture.
Re, Re-Loading, probably best to just buy yourself a cheap reloading setup and learn.
Assuming you won't be getting through large quantities of ammo so probably you are only making up 20 at a time.
You only need a basic press, die set and scales and possibly a trimmer plus a Vernia to measure length with.

There are guys around that will reload of others but not many with have dies for the 307Win.
Z

[m101a1]

Thats an unusual one, can we see a picture.
Re, Re-Loading, probably best to just buy yourself a cheap reloading setup and learn.
Assuming you won't be getting through large quantities of ammo so probably you are only making up 20 at a time.
You only need a basic press, die set and scales and possibly a trimmer plus a Vernia to measure length with.

There are guys around that will reload of others but not many with have dies for the 307Win.
Z

For 307 you just used 308 dies with a 307 shell holder ( buy a set of lee holders covers all cals ) and use 30/30 projs you can also use downloaded 308 but but they wont extract easily and MUST use flat nosed projs or the hornady ftx in using the mag feed .

[omark]

Thats an unusual one, can we see a picture.
Re, Re-Loading, probably best to just buy yourself a cheap reloading setup and learn.
Assuming you won't be getting through large quantities of ammo so probably you are only making up 20 at a time.
You only need a basic press, die set and scales and possibly a trimmer plus a Vernia to measure length with.

There are guys around that will reload of others but not many with have dies for the 307Win.
Z

You should be able to use 308 dies with a .30-30 shell holder to reload .307

[akaroa1]

You should be able to use 308 dies with a .30-30 shell holder to reload .307

Reloading 307 Win is just as easy as reloading 308

I recently built a 307 Win on a single barrel take down Baikal 12 gauge

The only problem is getting 307 brass
If you get fired brass with a used Winchester 94 Big Bore you are made
If you need brass you will struggle and old stock factory ammo might be your only option.

I can run my rifle on 308 ammo and being a break action single shot I can get the brass out easily
A bit tricky in a lever action though