Thread: Somethings wrong

Originally Posted by grandpamac

Something is different. It could be slightly decreased headspace but I would be starting with the scope mounting and the bedding. Check that your stock screws are not bottomed out as well. More data on the loads and how cases are sized would be useful.
GPM.

Hi grandpamc.
As yourself and others have said I'll check everything again before I shoot again
However it is bedded into an B&C Alaskan 11 stock, this didn't make any real difference as it shot well in the original BDL stock and was done before the barrel removal.
I didn't put it back together so will take it out and put it back in , I did however put the previous scope it had on it back on in exactly the same place on the rail .I will as above take apart and put it all back together again including checking rings rail etc.
The ammo is out of the same batch as before, not another batch.

I cannot put it down to bad shooting as I also took out another 30 06 and a 6.5x55 and they are shooting fine.