Thread: Stock torque settings

Pretty much. If your bedding is right there is no need for different settings between screws.

On a centerfire if the action flexes due to a poor chassis/bed then different settings may help. A 22 won't see much improvement imo.

Best way to tell if you have an action that is bending or flexing is to do up both screws and sit a DTI on the tang near the rear screw and undo it slowly. If you get over 10 thou then you may need to look at bedding.

Unless of course it shoots. Don't fuck with it.

Sent from my SM-G935F using Tapatalk