If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed.
Tobes, the generic calibre size usually refers to the BORE size, not the diameter of the grooves. 7mm cal is 7mm because the bore size (measured with a bore pilot bushing) is usually 0.275" to 0.277" (7mm) whereas the groove diameter is nominally 0.284". The bullets are usually sized to match this larger diameter.
Same thing with 6.5cal. The bore size is 0.255" to 0.256" (6.5mm) and the groove diameter is 0.264" .
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!
Bookmarks