I’ve just got it back, I’ll adjust the trigger and do a load up with some 2217 and 162 eldx and see how it likes it.
I’ve just got it back, I’ll adjust the trigger and do a load up with some 2217 and 162 eldx and see how it likes it.
Attachment 95328
Finally got a quick bit of load development done.
162 eldx. I pulled no 2 shot a little.
Was 10mm for 3
19mm for all 4.
Did 8 round ladder. Node tested at a flat spot.
Es 12 SD 5.3 velocity av 2905 FPS.
Year love my a bolts. This was only 68.3 gr. No pressure at all. I’d stoke it up a bit if it was my rifle but as I’m loading for someone else and it is within adi book spec it might cover my ase maybe. Still shoots well within manufacturers spec anyway.
There are only three types of people in this world. Those that can count, and those that can't!
My a bolt is left handed .270. Would be my favorite rifle. I bought that near new one of tm for a mate. Should be good. Never had a bad one and I’ve bought and set up 4 in .270 for people
Iv got one of these nice rifle , trigger was pretty crap I put one of those lighter springs in from mcarbo that made a noticeable difference groups well im using the 162 eld x for 3140fps , had trouble with the scope moving in the Leopold rings iv since put a vx5 on , plenty of loktight and so far all is well .
The Green party putting the CON in conservation since 2017
Hi Boaraxa, what was your load data for that and how was the grouping. Still working on mine but getting a lot of copper fouling at the moment. Have a good load now for the Berger 162 and the SST 154gr just trying to sort the ELD-X now
@FlukeShot grouping is sub moa out to 500y I haven't really done much shooting beyond that range , il have a look in the book latter .
The Green party putting the CON in conservation since 2017
162gr ELD-X, Hornady brass, ADI2225 @ 72.6gr C.O.A.L.= ??? @Boaraxa need to recheck it "I think" it was around 3.360" bottom to tip (overall)...
I managed to get the hells canyon trigger down to 3.5lb it needs a new spring to make it lighter. He’s got it for hunting tahr to. 400m so no big deal. I ran it out to 425 on plates to check dope and it was bang on.
I put the Timney spring kit in my abolt and that made a nice difference.
So what’s the over all thoughts on the hells canyon? I’m things about getting one of the ones in 28nosler that are floating around..... but unsure
ive had an MCarbo spring in my Xbolt since last xmas- fantastc- makes night and day difference.
Bookmarks