Thread: 9mm and rimfire bolt action

Originally Posted by xring

hey guys, one more image of the completed project. reading thru the new laws, I am not sure whether I am not complying with the rules. but i will wait and hand in stuff at the right time.
appreciated all comments!!! as I am starting a company to make these rifles, please guys, you can give me any ideas so I can put things into practice.
web site is coming out of the oven, so still under construction:

http://www.marshalprecision.com

Attachment 108724

You need to take drastic evasive action mate, with those pistol magazines as even if you put in a shortened 10 round magazine, it can accept a larger magazine.

You could make one with a magazine well that takes a squared off toe double stack 10 round magazine, the mag to be dropped in from the top and therefore not able to be expanded.

A 9mm double stack magazine can be made from a .223 magazine as the bases/rims are similar.

Option is to change mags by dropping them out by pressing the release and turning the gun upside down and then dropping in another full mag -- or just top them up with a stripper clip. The latter is preferable IMHO.

It is retro cool to feed with stripper clips, like the Broomhandle Mauser. Again, you can use .223 stripper clips for 9x19mm stripper clips.