Thread: Project Howa mini carbon chassis

Subscribed!
Will be watching this closely

So today it was time to have a crack at the butt end of the stock.
Basically all ally. Needs a lot of cleaning up yet and had a bit of trouble with contamination on the welds. Bit of a mk1 and open to suggestions.


Will attach an adjustable carbon cheek rest via tapped bolts into the ally recoil pad mounting plate.
Will also put a small bag rest bar in as in the last photo but didn't have the material.

Clamping bolts will be switched to Allen dome head bolts
I could have had the sleeve shorter but wanted it to be secure and does allow for some length of pull adjustment