Thread: Moving the gun safe

well whatever you use make sure you use more than you think you need...some really big screws into floor and walls work well,a dozen gib screws into panels will hold a hell of a lot.... not being able to move it seems to be the usual test when its inspected...Im yet to see someone get down n dirty to see if its bolted.... I struggle to get enough wrist strength to twist screws home,so use square headed screws and the cordless drill OR put the bits into correct sized socket and use the ratchet to snug them up tight. having just done the rear fence of section with iron fence,the screws used really impressed me with strength and they hare done up with a decent sized socket type bit,you can get them in longer lengths too...no way would you manage to pull them out of timber.