-BW-
Member

265 Likes

Page 5 of 18 First 123456789101112131415161718 Last

• Jump to page:

1. 
   -BW- liked post by No.3 On thread : best budget electronic earmuffs

   The only thing I can say is how often will she be using them and can you get replacement ear pads and foam wind blockers? I started with cheap ones, and they either sucked or died young. Just about...

   Liked On: 27-11-2023, 07:50 PM

2. 
   -BW- liked post by Fssprecision On thread : Tricky Extractor Remake

   Now this was a challenging little item to make, it's an extractor for an old French military rifle, so lucky to had an original to copy. Not something I want to make too many more of ha ha ha ...

   Liked On: 27-11-2023, 01:31 PM

3. 
   -BW- liked post by Von Gruff Knives On thread : A Lee Speed stock

   Finished the gross shaping of the butt stock. It is important to make sure the faces are straight so still a little to take off the middle at this stage. https://i.imgur.com/XOkPx4Kl.jpg with...

   Liked On: 27-11-2023, 01:30 PM

4. 
   -BW- liked post by Von Gruff Knives On thread : A Lee Speed stock

   Starting the next stage requires a grip cap and as a horn cap was wanted I needed to look through some cape buffalo horn to find a nice piece to give me the thickness needed after grinding the back...

   Liked On: 27-11-2023, 01:30 PM

5. 
   -BW- liked post by Fssprecision On thread : Suppressed Lever Action

   So here you go everyone, following my question regarding what do Pig hunters want, I had a fair bit of interest in an idea for a cut down, suppressed lever action. To that end I got a brand new...

   Liked On: 19-11-2023, 09:32 AM

6. 
   -BW- liked post by Von Gruff Knives On thread : A Lee Speed stock

   The butt plate being hollow needs careful sculping to get the fit right into the hollow. Quite a bit of time/patience later it is a nice fit. I like to file the waste wood away from the butt plate...

   Liked On: 17-11-2023, 10:31 PM

7. 
   -BW- liked post by akaroa1 On thread : Blank barrel

   Barrel wall thickness 2.3mm so a lot less than you would expect Very different process boring, reaming and cut rifling an existing barrel

   Liked On: 17-11-2023, 09:06 AM

8. 
   -BW- liked post by RUMPY On thread : Blank barrel

   Here is the barrel being chambered in lathe 104224 This is the completed barrel machined to fit down the 12g barrel. 104225 Close up of chamber end. 104226 Barrel fitted into 12g.

   Liked On: 16-11-2023, 05:10 PM

9. 
   -BW- liked post by Brad S On thread : Gun Porn, show off your new toys

   My first little rifle. Thanks to Viper for selling it to me. A wonderful thing 237282

   Liked On: 13-11-2023, 07:41 PM

10. 
    -BW- liked post by dannyb On thread : Gun Porn, show off your new toys

    Well the fluro green and skulls are now gone, and i must say, It's hard to believe it's the same rifle.... 237253 237254 237255 237256

    Liked On: 13-11-2023, 07:41 PM

11. 
    -BW- liked post by Pommy On thread : WTF Bubba

    I'm sure good old Stevie68 will still snap it up.

    Liked On: 09-11-2023, 09:19 PM

12. 
    -BW- liked post by Tahr On thread : Useing the firearms register

    The chance of this thing ever being perfect is zilch. So focussing and hand wringing on the most unlikely things that could happen is totally futile. To be useful this thread should be focussed...

    Liked On: 09-11-2023, 09:15 PM

13. 
    -BW- liked post by Ross Nolan On thread : Useing the firearms register

    I'm sure that this register is unique in history, and won't be used to enable confiscation.

    Liked On: 07-11-2023, 12:42 PM

14. 
    -BW- liked post by homebrew.357 On thread : Blank barrel

    Well no, my state of the art cutters are made from T C tipped saw blades and as I`m hand cranking slowly through the barrel with my top of the range C N C set up there`s no wear on the cutter. My...

    Liked On: 06-11-2023, 09:17 PM

15. 
    -BW- liked post by Marty Henry On thread : Got a Gun With Screw-in Chokes?

    Leaving them loose isn't the greatest idea, they unscrew slowly due to recoil. This one shot out of a perazzi? being used by someone used to extended chokes. Threads amazingly undamaged in the...

    Liked On: 05-11-2023, 04:31 PM

Page 5 of 18 First 123456789101112131415161718 Last

• Jump to page: