akaroa1
Member

5356 Likes

Page 103 of 358 First ... 3538990919293949596979899100101102103104105106107108109110111112113114115116117153203 ... Last

• Jump to page:

1. 
   6.5 CRD liked post by akaroa1 On thread : Lapua 6.5 PRC Brass - Split Necks

   That is an unusual split, not going through to the case mouth. Because you are so through with the brass prep and the Lapua brass should be just fine. I think there is something wrong between the...

   Liked On: 14-06-2023, 09:05 AM

2. 
   dannyb liked post by akaroa1 On thread : Lapua 6.5 PRC Brass - Split Necks

   I think bad lot of brass from Lapua least likely cause Look at the numbers carefully for the things you have and can create hard data from. Rifle, sized brass and fired brass

   Liked On: 14-06-2023, 08:30 AM

3. 
   Micky Duck liked post by akaroa1 On thread : so who has shot a deer with a .308

   @ Micky Duck here is a cautionary and timely tale about the 308 When we moved to level 3 and after a long period not hunting due to illness I took off for a day hunt on private land as L3 allows...

   Liked On: 13-06-2023, 07:58 PM

4. 
   grandpamac liked post by akaroa1 On thread : Brand new 2 bore rifle

   Yeh I stayed away from this post until grandpamac name checked me into it And I still haven't looked at the link Having dislocated both of my shoulders in a fall I will class myself as not...

   Liked On: 13-06-2023, 04:43 PM

5. 
   Micky Duck liked post by akaroa1 On thread : 303-25 reloading

   Yeetziy I have all the gear to do this Anneal 303 brass Form in 303-25 dies Trim to length Re anneal It's pretty easy Best done with good quality new brass Or with fired modern low round...

   Liked On: 12-06-2023, 05:43 PM

6. 
   Micky Duck liked post by akaroa1 On thread : 303-25 reloading

   A quick look through the more common 25 cals suggests that the 25-35 is maxed out at 2300 fps with 117 grain bullets The 250-3000 might get 2600 fps Your 303-25 might safely do 2700 fps And the...

   Liked On: 12-06-2023, 05:43 PM

7. 
   Micky Duck liked post by akaroa1 On thread : 303-25 reloading

   Yeetziy 226157

   Liked On: 12-06-2023, 05:42 PM

8. 
   Micky Duck liked post by akaroa1 On thread : 303-25 reloading

   Original Winchester 25-35 twist was 1:8" So fast twist is nothing new

   Liked On: 12-06-2023, 05:42 PM

9. 
   Micky Duck liked post by akaroa1 On thread : 303-25 reloading

   Nick Harvey shows max loads with 117 grains and 2600 to 2800 fps Pretty useful

   Liked On: 12-06-2023, 05:42 PM

10. 
    Micky Duck liked post by akaroa1 On thread : 303-25 reloading

    I have data in Nick Harvey's manual And dies Really easy to make brass from good 303 brass I brought the 303-25 dies to part form brass on the way to 303-22 I was Going to build a 25-35 and...

    Liked On: 12-06-2023, 05:41 PM

11. 
    Marty Henry liked post by akaroa1 On thread : Black powder repro guns (Italian).

    Wow you had a rare and valuable Paradox rifled barrel until the crack showed up

    Liked On: 12-06-2023, 03:26 PM

12. 
    Grey Kiwi liked post by akaroa1 On thread : Black powder repro guns (Italian).

    Wow you had a rare and valuable Paradox rifled barrel until the crack showed up

    Liked On: 12-06-2023, 02:51 PM

13. 
    Moa Hunter liked post by akaroa1 On thread : Euro Arms of America .45 black power info needed

    And before you load it and after you've cleaned the bore fire a couple of caps to clean the fire channel out Always fire a cap before loading after storage So you will also need a nipple...

    Liked On: 12-06-2023, 12:00 AM

14. 
    Marty Henry liked post by akaroa1 On thread : Longest continuously owned firearms

    And so it should It was usually your first rifle and maybe the last one you have because of those childhood memories

    Liked On: 11-06-2023, 10:43 PM

15. 
    blip liked post by akaroa1 On thread : 303-25 reloading

    Yeetziy 226157

    Liked On: 11-06-2023, 10:09 PM

Page 103 of 358 First ... 3538990919293949596979899100101102103104105106107108109110111112113114115116117153203 ... Last

• Jump to page: