ANTSMAN
Member

1061 Likes

Page 57 of 71 First ... 74344454647484950515253545556575859606162636465666768697071 Last

• Jump to page:

1. 
   ANTSMAN liked post by DPT On thread : Dpt suppressor

   The dpt over barrel with 4 baffles is 285 grams, you are probably counting the part that threads onto the barrel as a baffle, its not, the baffles have a caliber engraved on them. The baffles are 25...

   Liked On: 28-06-2020, 09:02 PM

2. 
   ANTSMAN liked post by Kelton On thread : 28 Nosler - Browning X-Bolt

   Rebarrel your rem mag with an 8 twist bartlein chambered in 7mm blaser sling the 180s easy at mag length at 3060 mellow load and save your self 10 gns of powder per round. The blaser is unreal ....

   Liked On: 16-06-2020, 09:06 PM

3. 
   ANTSMAN liked post by Oli1102 On thread : Annealling

   I built one similar, however using a second motor and case feeder. I have a chart on the top left that I use to record previous settings for cartridge/headstamps. I use tempilaq to work out the...

   Liked On: 01-06-2020, 05:03 PM

4. 
   ANTSMAN liked post by Tahr On thread : 300wsm- 20/22 inch Tikka with 178 eldx

   Wonderful start. Are going to leave it at 24"? You began the thread thinking 22/20".

   Liked On: 01-06-2020, 02:49 PM

5. 
   ANTSMAN liked post by 25 /08 IMP On thread : Model 7 rechamber

   Yip go the .260 I think the SAUM is better on a long action where you can seat out the heavier pills Sent from my CPH1903 using Tapatalk

   Liked On: 01-06-2020, 09:34 AM

6. 
   ANTSMAN liked post by deer243 On thread : New spot, a 223 and some good skills secures the 223 first Red!

   Hi, yes, another bushstalking adventure report. After last couple of outings not quite securing the venison or bacon i was off on another adventure with yet another day off work. This trip was into...

   Liked On: 30-05-2020, 11:50 AM

7. 
   ANTSMAN liked post by Nick-D On thread : Hunting with "Heavies" in 308 etc

   VX3 all the way, light, reliable and capable. Ive got the 1.75 - 6 x32 on my bush gun. Threw the S1 dial on there for shits and giggles but its actually fine to use. I prefer dialing to holdovers so...

   Liked On: 30-05-2020, 10:48 AM

8. 
   ANTSMAN liked post by Gibo On thread : Hunting with "Heavies" in 308 etc

   I run a vx2 3x9x40 CDS on my 308. Windplex and zero stop. It is a demon out to 500 slinging the 165 BTs at 2650. I do however hunt the bush 99% of the time and find 3 power ok for this job. ...

   Liked On: 30-05-2020, 10:48 AM

9. 
   ANTSMAN liked post by McNotty On thread : Walnut and blued steel,

   The old man got lucky years ago, shitty old Parker Hale and a broken pump action shottie got stolen when our house got burgled. Ended up with this beautiful Sako .270 from insurance. Always remember...

   Liked On: 24-05-2020, 06:13 PM

10. 
    ANTSMAN liked post by jakewire On thread : Walnut and blued steel,

    Sure Husqvarna 1640 manufactured 1963. In 9.3x62 Finished project. 140478 30 06 manufactured 1957, is currently working in progress but can photo where I am with it tomorrow if you like.

    Liked On: 24-05-2020, 06:11 PM

11. 
    ANTSMAN liked post by Tentman On thread : Hunting with "Heavies" in 308 etc

    Hello Guys Been working on a new "strictly hunting" 308, it'll have a 21" barrel and as I'm aiming for a weight of 3.2Kgs (7.0 lbs) all up - its going to have a light scope with a 25.4mm tube. ...

    Liked On: 22-05-2020, 11:06 PM

12. 
    ANTSMAN liked post by Lucky On thread : Great to be in the Mountains again

    Stunning weather and few days in the hills , 6 Chamois seen 2 were bucks and on there own but on the move ,5 deer seen also , pic of dawn on the tops . 140418

    Liked On: 22-05-2020, 11:03 PM

13. 
    ANTSMAN liked post by grandpamac On thread : tikka t3x 300wm cant get to group....

    Greetings Larksramer, One thing to remember when trouble shooting is to only change one thing at a time and then test. If you change several things at once you will never know what the problem was....

    Liked On: 17-05-2020, 04:45 PM

14. 
    ANTSMAN liked post by Tahr On thread : Range Wellington

    https://sites.google.com/site/wellingtonbranchnzda/range-and-club-programme?utm_source=Email+Newsletter&utm_campaign=8d57ec5774-EMAIL_CAMPAIGN_2019_03_05_10_49_COPY_01&utm_medium=email&utm_term=0_57d7...

    Liked On: 17-05-2020, 01:05 PM

15. 
    ANTSMAN liked post by takbok On thread : Self isolation gun projects

    Well, I'll keep posting here since we're still in lockdown here in Scotland and I've got another 2 weeks of furlough from work... My first successful carbon fibre stock. Made plenty mistakes and...

    Liked On: 16-05-2020, 09:12 PM

Page 57 of 71 First ... 74344454647484950515253545556575859606162636465666768697071 Last

• Jump to page: