AR7
Member

77 Likes

Page 4 of 6 First 123456 Last

• Jump to page:

1. 
   AR7 liked post by Mintie On thread : Ruger 1022 info

   1022's will still happily operate down to very short barrel lengths - much shorter than required to get to 762, allegedly

   Liked On: 07-11-2024, 07:08 AM

2. 
   AR7 liked post by Fssprecision On thread : Where to buy Delrin ring inserts

   I make them for the PARD supplier, if you pm or email fssprecision@gmail.com me with details I will get back to you after the weekend Cheers Darren

   Liked On: 01-11-2024, 09:28 PM

3. 
   AR7 liked post by Fssprecision On thread : Fully suppressed multi shot

   A long-term project is finally coming together, with many liking my fully suppressed single shot 410s, a few have also wanted more than one shot. So here it is, originally based on a pump action,...

   Liked On: 28-10-2024, 07:40 AM

4. 
   AR7 liked post by Fssprecision On thread : New model - Suppressed Pigger

   Finally got a Pigger version of the 410 sorted after so many ask if the fully suppressed version can shoot slugs (no it’s not suitable for that) This one has a ported barrel and fully anodised...

   Liked On: 06-10-2024, 05:59 PM

5. 
   AR7 liked post by Fssprecision On thread : Gun serial numbers for Registration

   I have had a few serial numbers to stamp on guns recently for guns being registered, as such I have decided that for the next couple of months or so I will charge just $20 for this, but all money...

   Liked On: 02-08-2024, 04:16 PM

6. 
   AR7 liked post by quentin On thread : Show me your lightweight rifle

   Picked up this Howa mini in 6.5 Grendel from here. Already had all of the work done to make it light. 2.9kg without any ammo in the magazine. 256165

   Liked On: 01-08-2024, 11:08 AM

7. 
   AR7 liked post by Fssprecision On thread : Ideal supressor thread?...

   14 x 1 is pretty common these days so you should have no problem with availability BUT it also depends on the diameter of the barrel, you need a good shoulder to screw the can up to.

   Liked On: 26-06-2024, 11:33 AM

8. 
   AR7 liked post by Barefoot On thread : EPS (Chiller Panel) shower install help

   go industrial style - exposed pipes and create a surface mounted box for the mixer.

   Liked On: 09-06-2024, 08:48 PM

9. 
   AR7 liked post by Fssprecision On thread : Gunsmithing under threat?

   News to me, sounds like rubbish. The Gunsmith Licence is just a Dealers Licence with no quantity restrictions.

   Liked On: 09-06-2024, 11:48 AM

10. 
    AR7 liked post by Ammo Direct NZ On thread : Intro

    Hello! Ammo Direct NZ is happy to be joining the list of forum sponsors. We operate a store and warehouse in Rolleston a short drive out from Christchurch - you may have seen us online already....

    Liked On: 07-06-2024, 04:28 PM

11. 
    AR7 liked post by Fssprecision On thread : choke boring

    I have not done it but understand you must also extend the forcing cone as well

    Liked On: 01-06-2024, 11:28 PM

12. 
    AR7 liked post by Fssprecision On thread : HGPRECISION. Cnc gunsmithing and services

    Good Luck, hope it works out for you.

    Liked On: 30-05-2024, 08:31 AM

13. 
    AR7 liked post by Fssprecision On thread : Ruger 10/22 rotary mag issues

    Clean is the key and I have always used this principal to re tension the spring with no feeding problems.. Using one of the flat hexagon edges as reference, that edge must be turned clockwise...

    Liked On: 27-04-2024, 05:32 PM

14. 
    AR7 liked post by robhughes-games On thread : Kiwi made howa mini bottom metal

    I've put a far amount of time into getting theses where I think they are good to go. No more dropping factory mags accidentally. The release is built to be enclosed and protected. It also is...

    Liked On: 24-04-2024, 08:45 AM

15. 
    AR7 liked post by Fssprecision On thread : RPR RIMFIRE RAIL SLOTS NOT DEEP ENOUGH

    I have sorted a few rails with shallow rail slots, stayer was one I remember. Really want to do on a mill to do properly

    Liked On: 20-04-2024, 08:18 PM

Page 4 of 6 First 123456 Last

• Jump to page: