Yep …… 6.5 Cree-turtleneck 118334
Liked On: 26-08-2019, 04:26 PM
Um there is quite a lot more than just fiordland that is balloted. Often small one off blocks but also all of wanaka, Haast, molesworth blocks etc. They are concentrated down south but pays to check...
Liked On: 20-08-2019, 11:10 AM
I’ve got a rem 600 Mohawk in 222 which probably falls in the same bracket
Liked On: 12-08-2019, 11:54 PM
It's always amazed me the amount of kiwis who pronounce "Anschutz" as "Anschultz". Must be a hangover from Shultz on "Hogan's Heroes".
Liked On: 12-08-2019, 11:47 PM
I looked at the 1770 , nice rifle but compared to the S&L it had a slower twist, smaller mag and the wood on the ones I saw was pretty average. Legacy is also a switch barrel so that appealed to me...
Liked On: 12-08-2019, 11:40 PM
As required by law, the dealer will have a record of the rifle sold, so therefore will know they sold the scope with it as a package. Under the Consumer Guarantees Act the seller is required to...
Liked On: 12-08-2019, 01:50 PM
Those Anschultz 1771 are nice but not much more than beefed up rimfire actions. In fact I think I recall "factory ammunition only" being stamped on them. The way us Kiwis like to hot rod everything...
Liked On: 10-08-2019, 09:51 PM
Practice is key obviously, but imo for accurate freehand shooting having a decent trigger makes a huge difference. Worth in vestigating for sure if your trigger is in the heavy side
Liked On: 09-08-2019, 01:32 PM
I have de primed live primers if thats what you mean. Safety glasses and caution as you go
Liked On: 08-08-2019, 10:23 PM
Standard seems to be to screw in til the die touches the shell plate, lower the ram and screw in another 1/4 turn. Otherwise, mechanical play and stacking of tolerances in the press and die threads...
Liked On: 08-08-2019, 10:20 PM
You need to shoulder bump them. You might have to place a feel gauge under the case in the shell holder when you full length and cam over. This is the easiest way instead of buying shell holders with...
Liked On: 08-08-2019, 10:20 PM
Get and learn to use a sling, this halves most people's groups. Drill the fundamentals - hold, breathing, trigger pull, follow through. Consistency is key. Get a stupid-high magnification scope and...
Liked On: 08-08-2019, 09:52 PM
If you know who loaded it, and that it was done to spec, it should be fine. Old .303 rifles tend to have eroded throats so overpressure-by-jamming isn't really an issue, it would only be if they'd...
Liked On: 02-08-2019, 11:01 PM
Ive shot ammo i loaded in the 90s but then i know what was in it. I also regularly shoot mil slurp from the 50s and 60s with no issues apart from the occasional hangfire with some 40s stuff. A bit...
Liked On: 02-08-2019, 11:01 PM
this one survived typical of what it was doing 116519
Liked On: 30-07-2019, 11:18 AM