Baz
Long-ranger

34 Likes

Page 1 of 3 123 Last

• Jump to page:

1. 
   Kiwi-Hunter liked post by Baz On thread : The birds are back - feeding a pond?

   The last NZ Hunter magazine had a good article about feeding ponds and a few different approaches to doing it. I made a couple of feeders last year I made my own NOSLOC feeder nozzle out of some...

   Liked On: 17-05-2021, 11:31 AM

2. 
   Dead Rat liked post by Baz On thread : Prredator Control !!!!

   I brought 2 DOC250 traps and made the boxes out of ply wood as per their plans, smashing back the rat population at the moment.:thumbsup: The other cheap tick is the storm secure rat baits inside...

   Liked On: 10-04-2021, 11:04 AM

3. 
   Beaker liked post by Baz On thread : portable bench

   A portable design I am working on. The 2 pipes are off the shelf steel. NB 80 medium wall for the main upright, OD 88.9mm, sleeve is NB 90 40S with OD 101.6mm and 5.74mm wall giving 0.61mm...

   Liked On: 12-09-2016, 07:39 AM

4. 
   WallyR liked post by Baz On thread : portable bench

   A portable design I am working on. The 2 pipes are off the shelf steel. NB 80 medium wall for the main upright, OD 88.9mm, sleeve is NB 90 40S with OD 101.6mm and 5.74mm wall giving 0.61mm...

   Liked On: 11-09-2016, 01:54 PM

5. 
   PERRISCICABA liked post by Baz On thread : Annealing machines?

   The time in the flame must be controlled and constant. to much heat and it will travel into the body of the case and ruin it. The video above with the case feeder has a link to here home built...

   Liked On: 29-04-2015, 09:34 AM

6. 
   veitnamcam liked post by Baz On thread : Doppler Radar Chronograph - It's real.

   Finally looks like a chronograph is available that will surpass all existing types and models. LabRadar (http://www.longrangehunting.com/store/labradar.html) LabRadar - My Personal Radar...

   Liked On: 15-02-2015, 10:55 AM

7. 
   res liked post by Baz On thread : Permit timeframes

   Got mine back this morning, signed 9/9/14

   Liked On: 13-09-2014, 04:35 PM

8. 
   nzfubz liked post by Baz On thread : Permit timeframes

   Got mine back this morning, signed 9/9/14

   Liked On: 13-09-2014, 01:14 PM

9. 
   Neckshot liked post by Baz On thread : Which wind meter for long range?

   This is my one. Brought a second hand wind meter/weather meter type. can't recall make and model. it likes to chew batteries tho. 25769 Courtesy/credit to Google images.

   Liked On: 22-06-2014, 08:57 AM

10. 
    veitnamcam liked post by Baz On thread : Which wind meter for long range?

    I have it printed and laminated to fit in the lid of my MTM case for the ammo i'm shooting.

    Liked On: 21-06-2014, 10:37 PM

11. 
    Toby liked post by Baz On thread : Which wind meter for long range?

    This is my one. Brought a second hand wind meter/weather meter type. can't recall make and model. it likes to chew batteries tho. 25769 Courtesy/credit to Google images.

    Liked On: 21-06-2014, 08:48 PM

12. 
    Driverman liked post by Baz On thread : Testing for accuracy

    I use a 'caldwell THE ROCK' as per photo with a rear bag on a bench at the correct and comfortable height. works very well.24527

    Liked On: 30-05-2014, 08:49 PM

13. 
    Toby liked post by Baz On thread : Testing for accuracy

    Toby Change the bottom pivots to bolts as my picture to take out the 'slop' in the pivot. 50x25x3 RHS gives it a bit of weight in the base.

    Liked On: 25-05-2014, 08:40 PM

14. 
    Bryan liked post by Baz On thread : Testing for accuracy

    I use a 'caldwell THE ROCK' as per photo with a rear bag on a bench at the correct and comfortable height. works very well.24527

    Liked On: 22-05-2014, 12:09 PM

15. 
    Shamus liked post by Baz On thread : Testing for accuracy

    I use a 'caldwell THE ROCK' as per photo with a rear bag on a bench at the correct and comfortable height. works very well.24527

    Liked On: 22-05-2014, 10:30 AM

Page 1 of 3 123 Last

• Jump to page: