You can only get Lockease by importing it. There is an equivalent local product- can't remember where I got it from but they're a science/tech supplier. Just search colloidal graphite and it should...
Liked On: 06-02-2024, 01:16 PM
If it did work, I'm guessing you'd want to apply it before a trip and then re-oil the bore before putting the gun back in the safe. The alcohol carrier would be a good degreaser and strip out any...
Liked On: 06-02-2024, 01:16 PM
I wonder if a cast lead round or two would speed up the process????
Liked On: 06-02-2024, 12:54 PM
I have a lot of time for the .22 Margolin pistols. They are inexpensive, well made, very accurate and reliable, and lend themselves to modification that makes them a World class competition pistol...
Liked On: 06-02-2024, 12:51 PM
i had an svt40, bloody awesome fun
Liked On: 06-02-2024, 12:49 PM
Man you are using a lot of ammo after a barrel clean just to get better groups. Heres an old target shot by my 308 tikka 8yrs ago after a gentle patch hoppys clean thru the barrel. Hornady 165gr...
Liked On: 04-02-2024, 05:36 PM
My howa 223 is about 2000 rounds down, never had anything but the odd bit of CRC or Breakfree down the barrel and cleaned with a bore snake with bronze bristles removed, end of most days. Used about...
Liked On: 04-02-2024, 05:36 PM
What you are experiencing is a common phenomenon and the simple solution is to not clean it so often, and when you do then just a quick pass with a dry brush is enough. My .223 Tikka CTR is similar...
Liked On: 04-02-2024, 05:35 PM
What size groups are you talking before and after cleaning?
Liked On: 03-02-2024, 08:33 PM
I believe......what you experiencing will have something to do with fine copper coating filling in rougher bits of the bore..for better way to discribe it... try couple of oily patches/breakfree clp...
Liked On: 03-02-2024, 08:32 PM
your cleaning it to much!as said above you want copper to fill the microscopic imperfections in the barrel,just run one patch lightly oiled thru it after shooting for storage protection then dry...
Liked On: 03-02-2024, 08:32 PM
Last month I thought it was a smart idea to put a ballon at the end of the barrel of one of my rifle and fill the barrel with Boretech eliminator. Group went from a 0.5moa average to 2inch at 100m…....
Liked On: 03-02-2024, 08:03 PM
Over time, a layer of carbon and copper fouling builds up in the barrel. This fouling can help condition the bore, filling in microscopic imperfections and providing a consistent surface for the...
Liked On: 03-02-2024, 08:02 PM
Currently I must be around at least 500 rounds since cleaning, accuracy is not affected, shoots 3/4 or better. I'm not a rough bugger, just my barrel despises being cleaned Edit: I do run a bore...
Liked On: 03-02-2024, 08:02 PM
the answer is because.
Liked On: 03-02-2024, 08:02 PM