I'd gladly pay more for the privilege of hunting, to contribute more to effective management and advocacy for hunters and access. To be honest, it's bananas that we don't pay for it currently. ...
Liked On: 01-07-2018, 12:05 AM
Good for me!
Liked On: 25-06-2018, 06:00 PM
Yeah you won't be doing any (precise) holdovers with that reticle. I would be leaving the cap off and dial. Put a neoprene cover over the lot to protect it. Can you zero the turrets? Does it have...
Liked On: 02-06-2018, 09:48 PM
Yeah you won't be doing any (precise) holdovers with that reticle. I would be leaving the cap off and dial. Put a neoprene cover over the lot to protect it. Can you zero the turrets? Does it have...
Liked On: 02-06-2018, 08:22 AM
I ran 46.2gr 2209, pushed the 143 ELDX to 2745 or so. It's a fair bit over book max so work up to it
Liked On: 11-04-2018, 11:36 AM
I ran 46.2gr 2209, pushed the 143 ELDX to 2745 or so. It's a fair bit over book max so work up to it
Liked On: 13-03-2018, 06:52 PM
Swim to the bottom. Shoot them in the face.
Liked On: 14-02-2018, 11:04 AM
2 seconds to google: http://www.adi-powders.com.au/handloaders/rifle.asp?Calibre=6.5+x+55mm+Swedish+Mauser
Liked On: 30-01-2018, 10:16 PM
2 seconds to google: http://www.adi-powders.com.au/handloaders/rifle.asp?Calibre=6.5+x+55mm+Swedish+Mauser
Liked On: 30-01-2018, 07:40 PM
2 seconds to google: http://www.adi-powders.com.au/handloaders/rifle.asp?Calibre=6.5+x+55mm+Swedish+Mauser
Liked On: 30-01-2018, 11:00 AM
I have a DPT over barrel, cut my swede to 20" and don't miss much speed - I get 2740 fps from 143gr ELD-X
Liked On: 22-01-2018, 12:35 AM
Presumably you got the receiver milled and tapped to accept the base - where did you get that done?
Liked On: 11-12-2017, 10:13 AM
More or less shower proof as well, apart from the stupid stitching across the chest which isn't seam sealed. I spent about 3 hours at the range in light rain and only got wet on my front in that...
Liked On: 03-08-2017, 10:20 AM
Tried letting the barrel foul? Sounds like an awful lot of cleaning going on.
Liked On: 14-02-2017, 10:02 PM
Action bolts torqued correctly? Nothing stuck (dirt, twigs etc) between action and stock?
Liked On: 22-01-2017, 10:39 PM