Just doing some load development this morning... pretty stoked with this load, its nowhere near max but 2500fps with the 270gr speer and I think I've got the hang of shooting it now :) that'll do me!...
Liked On: 26-05-2020, 07:09 PM
John Herbert, NZ Repeating Arms, sells Criterion P14 barrels, they match the original profile. When I bought one they were $480 ish.
Liked On: 26-05-2020, 07:05 PM
Decided to take the .410g for a stroll up the creek on the boundary last night. I barely got 50m before kicking up a nice cock pheasant, I got a shot off at about 40m and it dropped clean but...
Liked On: 26-05-2020, 07:04 PM
Sharpening a D2 knife blade: some photos, observations, and opinions I ended up with a couple of small chips out of the edge of my re-handled Spyderco Junction after my post-lockdown trip. The...
Liked On: 25-05-2020, 06:35 PM
Recently a forum member asked about sourcing a couple of Axes from here in Norway.I restore old things as a Hobby and had picked up a couple of Axes recently. He wanted somthing along the lines of...
Liked On: 25-05-2020, 06:33 PM
send it to me i can sort that for you cheers john
Liked On: 25-05-2020, 06:31 PM
It's a Merkel 96k in 12 x 12 over a 7 x65R barrel. I bought it after hunting chukar and seeing thar @ 60m and not being able to do anything about it.. So far the only deer I've shot with it have...
Liked On: 25-05-2020, 06:26 PM
And a curved top rib test Went better than the flat one Lots to learn 140759
Liked On: 25-05-2020, 05:38 PM
On the top of my want list.
Liked On: 25-05-2020, 05:35 PM
So, I took possesion of my shiny new 375 H&H a week or two back and yesterday I finally got to fire it. When I first got it, it had a steel leupold scope base on it and upon mounting a scope in it (I...
Liked On: 25-05-2020, 05:34 PM
I have waited 8 long lockdown weeks for this bad boy, still waiting on some custom leather work to complete it but had to post it up. My first foray into the world of lever guns. 16.5" stainless...
Liked On: 25-05-2020, 05:30 PM
I've sort of lost interest in the whole long range thing but I would say most of my hunting would be 0-350yds which im sure this rifle is more than capable of with a 200yd zero and a bit of learning...
Liked On: 24-05-2020, 11:56 PM
So one of the things I loved about the lock down was I had time to actually sit down and get a few ideas that had being floating around in my head for awhile started. As some of you may recall I...
Liked On: 20-05-2020, 08:41 PM
you could go 12 volt and have the transformer in the ceiling , then you are allowed to do it yourself.
Liked On: 20-05-2020, 11:23 AM
csmiffy is that big Jims rifle ?
Liked On: 20-05-2020, 10:59 AM